New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Trusted Custom & Geometric Windows for Summerlin Homeowners
Angled walls, two-story foyers, and arched entries are common in Summerlin’s custom homes, and standard rectangular windows fit none of them well. Poorly fitted units leave gaps at the corners where wind and desert heat push through, and that gap shows up on your summer power bill before it shows up anywhere else. Our technicians bring up to 14 years of experience to every measured survey, reading each opening to the fractional inch before quoting a single product. We install custom and geometric windows across Summerlin, from The Ridges to Red Rock Country Club, and the price you see on the written quote is the price on the invoice. Call (844) 560-5201 to schedule your free estimate.
Every job runs under the Haven Standard, the same set of guarantees that has governed our work since 2012: written price before any tool is lifted, background-checked crews identified by license number, and a documented photo record when we finish. A 365-Day Done Right Promise stands behind the whole thing. Custom windows aren’t a same-day job, and we won’t pretend otherwise. What we can promise is that the plan is written down and the schedule is real.
What Our Custom & Geometric Windows Service Includes

Custom work means the frame is built to the opening, not the other way around. Here’s what that looks like across the four categories we handle most in Summerlin.
Custom Impact Windows
Impact-rated glass is specified in Clark County for good reason: the valley sits in a high-wind zone, and a broken window during a monsoon gust is a pressure failure waiting to happen. Custom impact windows are built to your opening’s exact dimensions while carrying the laminated glass and reinforced frame that meet local wind-load requirements. We measure the rough opening, verify the structural anchor points, and specify a product rated for the actual wind exposure at your elevation. That’s often different two streets over in Summerlin, and the survey reflects it.
Geometric & Shaped Windows
Triangles, trapezoids, hexagons, and half-rounds get cut to the shape of the wall, not adjusted into it afterward. These make sense where a gable, stairwell, or vaulted ceiling leaves you with an awkward triangular space a standard window can’t fill cleanly. Every shape starts as a template traced from the opening itself, so the finished frame follows the drywall line rather than fighting it. We specify the manufacturer line by what the geometry and performance spec require, whether that’s a PGT shape series or a CGI custom unit.
Arched & Curved Windows
Arched and curved windows follow the radius of the wall above entryways, bay windows, and eyebrow dormers. A curve cut to the wrong radius leaves a visible gap at the spring line, and those gaps leak. We measure the radius and the chord length, then confirm the glazing spec holds up against direct west and south sun, which is a real load factor on Summerlin’s exposed elevations. Pay attention to U-factor here: the lower the number, the better the glass resists heat transfer, and curved glass has more surface area to manage.
Oversized Openings
Sliding wall systems, picture windows over great rooms, and multi-panel openings require structural review before a product goes on the order. We verify header loads, confirm the rough opening is plumb and square, and check that the product’s wind rating holds at the panel size you want. Oversized units are heavier, so the installation plan accounts for that weight from the anchor schedule up front. If a wall needs reinforcement before glass goes in, you’ll see that in the written scope, not after we’re on site.
Before
AfterBrands We Service for Custom & Geometric Windows
We work across several manufacturer lines, and each one has its own tolerances, frame profiles, and failure points we’ve learned by installing them. PGT is the line we reach for most on impact-rated geometric shapes, and we know which of its shape series handle large radius arcs without frame deflection. CGI builds a strong custom unit for oversized and complex openings, and the spec sheet tells us fast whether a particular span needs heavier mullions. ViewLux comes up on energy-driven specs where the homeowner wants a tight U-factor and low solar heat gain coefficient (SHGC, the share of the sun’s heat that passes through the glass).
Therma-Tru matters more on the door side of a custom opening, where a shaped transom or sidelite has to match the door system’s performance rating. Whether you have a PGT shape unit, a CGI custom frame, a ViewLux energy build, or any other make, we can help. Every one of those brands gets specified by what the opening requires and the price range it sits in, not by what carries the best margin. If a competitor quoted one line and you want to know whether a different one fits better, our free second-opinion review on any written estimate is a no-charge way to find out.
Signs You Need Custom & Geometric Windows Right Now

- Daylight showing at the corner of a shaped window. If you can see light where the frame meets the angle, air and water are moving through the same gap. In Summerlin’s wind, that gap gets worked wider over one season.
- Condensation or fogging between panes on a curved unit. Sealed glass that fogs has lost its argon fill and its insulating value. A curved window is expensive to replace the glass in alone, so catching it early matters.
- A draft you can feel along an arched spring line. The point where an arch meets the wall is the hardest joint to seal. If you feel moving air there, the weatherproofing has failed.
- Visible cracks in the frame of an oversized pane. Thermal stress on large exposed glass is real on south and west elevations. A crack in the frame isn’t cosmetic; it’s the structure telling you it’s under load.
- A remodel or addition that leaves an irregular opening. Adding a stairwell, changing a roofline, or opening a wall creates geometry a stock window can’t fill. Measuring for a custom unit at the framing stage saves a retrofit later.
Our Custom & Geometric Windows Process – Step by Step
- 1
Measured survey. We read every opening to the fractional inch, check plumb and square, and template any non-rectangular shape by tracing it directly. You keep a copy of the survey; it’s the document the quote is built on.
- 2
Written scope and price. The quote names the product, the performance spec (wind rating, U-factor, SHGC), the install method, the schedule, and the dollar figure. Haven Clause 1 means the measured survey and the invoiced price are the same document.
- 3
Product specification. We match the opening to the right manufacturer line and confirm the glass build meets Clark County’s wind requirements. Any question about a spec gets answered in writing before the order is placed.
- 4
Installation. Background-checked, uniformed technicians arrive on the scheduled day, identified by license number before they start. Structural anchors, flashing, and sealing get done in the order the spec calls for, and a photo record documents each stage.
- 5
Final walkthrough and warranty. We walk the finished openings with you, hand over the documented photo record, and confirm the 365-Day Done Right Promise in writing. If something isn’t right in the first year, we make it right.
How Much Does Custom & Geometric Windows Cost in Summerlin?

Custom and geometric windows cost more than stock units because the frame is built to a template, and in Summerlin the local price reflects that. A typical arched window runs $1,200 – $2,400 installed, depending on radius, glazing, and whether the opening needs structural prep. A triangular or trapezoid gable unit generally lands between $900 and $1,800. Custom impact windows in a standard-size opening run $1,100 – $2,000, while an oversized opening or multi-panel system can run $3,500 – $9,000 and up, mostly driven by panel size and the structural review.
What moves the number: the complexity of the shape, the glazing spec (impact-rated glass costs more than standard insulated), the size of the opening, and any header or framing work the wall needs first. To avoid overpaying, get the written scope itemized by opening and confirm the performance spec is named, not just the product. Every estimate from us is free, written, and line-itemized, and the price won’t change once work starts unless you change the scope. We’ll also review a competitor’s written estimate at no charge so you can compare like for like. Call (844) 560-5201 for an exact quote.
Custom & Geometric Windows Near Summerlin – Our Service Area
We install custom and geometric windows across Summerlin and into the surrounding valley, including Custom & Geometric Windows in Spring Valley, Custom & Geometric Windows in Las Vegas, Henderson, and Enterprise. Measuring visits are scheduled, not same-day, since complex openings need time on site to template correctly. For homes in Spring Valley or Las Vegas proper, the travel is routine and the survey gets booked within the same week as your call. Wherever you are in the area, start with a free estimate and a survey you keep.
Serving Summerlin, NV – Our Local Coverage Area

We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Custom & Geometric Windows in Summerlin
Custom windows are built to the exact dimensions and shape of an opening instead of being ordered in stock sizes. Geometric windows are a subset that follow an actual shape: arches, triangles, trapezoids, curves, and oversized panels. In Summerlin homes with vaulted ceilings and angled walls, these are often the only way to fill an irregular space cleanly and still meet impact and energy specs. Call (844) 560-5201 to schedule a survey.
Most custom and geometric window installs take two to six weeks from the signed quote to the finished job, and the lead time is mostly product manufacturing. Templated shapes and impact-rated glass add fabrication time that stock units don’t carry. Once the product arrives, installation of a handful of units is usually a single day, and larger oversize projects can run two or three. Your written schedule names the projected install date up front.
Most projects land between $900 and $2,400 per opening for shaped units, and oversized or multi-panel systems run higher. Arched windows, impact-rated custom glass, and structural prep all push the number up, while a simple trapezoid gable unit sits at the low end. You get a written, line-itemized price before any work starts, so the estimate you receive is the number you pay. Call (844) 560-5201 for an exact quote, free of charge.
Yes, we install custom and geometric units from PGT and CGI, along with several other lines. We know where each one’s frame profile tolerates a large span and where a heavier mullion is required. If you already have a written estimate for a PGT or CGI spec and want a second look, we’ll review it at no cost. Call (844) 560-5201 to set that up.
We answer live around the clock, so if a large pane cracks or a shaped window fails and needs to be secured, call and we’ll advise you right away. Custom glass has to be fabricated to the template, so a full replacement isn’t a same-day fix, but we can talk you through protecting the opening and schedule the survey fast. Our phone line is staffed by a person, not a voicemail queue. Call (844) 560-5201.
Every job carries the 365-Day Done Right Promise: if something isn’t right within the first year, we make it right. That promise is written into the Haven Standard and stamped on every job, not offered as a verbal courtesy. You also receive the manufacturer’s product warranty in writing and the documented photo record of the install. Call (844) 560-5201 to review the warranty terms before you commit.
Clear the floor and wall space around each opening and remove window treatments and anything hanging nearby. Move furniture a few feet back from the work area and secure pets in a room we won’t be working in. Beyond that, we handle the protection and cleanup, and the measured survey from your first visit tells us everything else we need. Call (844) 560-5201 to schedule.
Schedule Your Custom & Geometric Windows Service in Summerlin Today

If an angled wall, an arched entry, or an oversized great-room window needs glass that actually fits, start with a measured survey and a written price. Every estimate is free, line-itemized, and locked to the survey you keep. Our technicians bring up to 14 years of experience, and live phone coverage is available around the clock. Call (844) 560-5201 to schedule your free estimate in Summerlin, with no obligation.
Written by the team at Sightline Windows & Doors Summerlin.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
