New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Fast, Reliable Custom & Geometric Windows Across Boulder City
Boulder City homes are not like the rest of the valley. Bungalows in the Historic District carry rough openings that were cut by hand 80 or 90 years ago, and the town reviews what you put in a street-visible opening before you can install it. We work in that reality. Our Custom & Geometric Windows team measures the existing jamb, photographs the frame, and writes a fixed price for a custom-order unit before anything gets ordered. Call (844) 560-5201 to set up a measured survey, and keep the survey whether you hire us or not.

Why Sightline Windows & Doors Summerlin Is Boulder City’s Preferred Custom & Geometric Windows Company

We’re independently owned and operated under the Haven Standard, and every job here follows Haven Clause 1: the price is written before a tool is lifted. The measured survey and the final invoice are the same document.
For a custom geometric window in Boulder City, that matters because the quote can move. Open a wall in a 1930s cottage and you may find undersized framing, old cloth-wrapped wiring, or flashing that stopped keeping water out years ago. A permit will trigger a code upgrade once that framing is exposed. We handle it the way it should be handled: inspect first, write allowances into the contract, and price any surprise in writing and get your approval before touching it. No change order arrives after the drywall is up. Haven Clause 5, No surprises, is the whole reason we do the survey before the estimate instead of after the deposit.
Every completed opening comes with a documented photo record and the 365-Day Done Right Promise. If it’s not done right, we make it right. Calls are answered by a live person, 24/7.
Before
AfterOur Custom & Geometric Windows Services in Boulder City
Arched & Curved Windows
Boulder City’s Minimal Traditional cottages and 1930s bungalows often had a graceful arch over the front window or a curved transom that got replaced with a flat aluminum slider in the 1970s or 80s. Restoring that shape means building the unit to the original radius, not trimming a stock arch to fit. We scan the opening, verify the arc profile, and specify the curve to match.
Oversized Openings
An oversized picture window facing south on the flats near 89005 will take the worst of the summer sun. That is a U-factor and SHGC problem, not just a glass-thickness problem. We size the unit to a real solar exposure calculation, then confirm the framing can carry the weight. Open up the wall and you might find the original oversize opening was never properly framed to begin with, especially on 1960s-70s ranch homes where the retrofit left the rough opening undersized.
Geometric & Shaped Windows
A triangular, trapezoidal, or hexagonal window in a Boulder City home usually means one thing: a custom glazed unit ordered to the exact opening. In pre-1940s homes that opening is frequently non-standard, so nothing off a shelf fits. We specify low-E insulated glass and, where the design pressure or HOA or historic guidelines require it, impact-rated glazing in the same unit without a second order.
Custom Impact Windows
Impact-rated glazing in Boulder City is less about hurricane and more about wind-blown grit and thermal stress on a west-facing opening. A dual-pane seal failure on that exposure shows up as cloudy glass and a crack at the corner where the heat load peaks. Custom impact units are ordered to the rough opening, and the design pressure has to match what the town or your HOA expects for the elevation.
Trusted Brands We Service in Boulder City

We specify from eight manufacturer lines by performance tier and price range, not by what happens to be sitting in a yard. The custom and geometric work in Boulder City usually pulls from PGT for impact-rated openings, CGI and CWS for shaped and energy-efficient units, and ViewLux for the architectural glass where the curve or the shape is the whole point. We don’t stock parts. Every custom unit is ordered to your measured opening, so the lead time is real and we tell you what it is before you sign.
Common Custom & Geometric Windows Problems We See in Boulder City Homes
The Historic Review That Changes the Estimate

Boulder City is one of the few Nevada jurisdictions where a street-visible window replacement in the Historic District has to pass a Historic Preservation Committee design review. That means a stock vinyl unit can be rejected outright at review, and the job has to match the 1930s-40s original profiles instead. Here’s what makes it worse: many of the pre-1940s homes have non-standard rough openings, so an off-the-shelf replacement physically won’t fit even if the committee allowed it. Every replacement becomes a custom-order job. And knowing which aluminum-frame replacements are pre-approved for your elevation can save weeks of review. This is where a Boulder City page earns its keep. In Henderson or Enterprise the same window is a stock swap. Here it’s a design review, a custom order, and a permit.

Common Problems We Find Once the Wall Is Open
- Failed dual-pane seals on west- and south-facing windows. In the 1960s-70s ranch homes, aluminum sliders were retrofitted without addressing the rough opening. The heat load on that exposure cracks the glass at the corner and fogs the seal within a decade.
- Grit in the door tracks and worn seals. Spring dust storms drive wind-blown grit into the tracks and seals, and the sliding and casement hardware wears out fast. When the seal finally fails, water gets in.
- Outdated wiring or undersized framing uncovered mid-job. A permit will trigger code upgrades once the wall is open, especially in pre-1940s homes with non-standard rough openings. Allowances written into the contract are what keep that from blowing up your budget.
- Failed flashing and waterproofing behind a retrofit unit. An old slider installed over rotted flashing leaks quietly for years. A custom geometric window in the same opening means we find it and price the repair before we install.
What a Custom Geometric Window Job Usually Looks Like

A typical project in a 1930s Boulder City bungalow often starts with a homeowner wanting an arched or oversized opening to match the original profile, only to find the rough opening is undersized or the framing has been compromised by decades of desert heat and dust. A qualified local pro inspects the jamb and framing first, then specifies a custom unit with low-E insulated glass and, where required, impact-rated glazing that meets design pressure plus the HOA or historic guidelines. That same inspection checks for old wiring or failed waterproofing the permit will trigger once the walls open. Our technicians have up to 14 years of experience, and every one is background-checked, uniformed, and identified by license number before arrival (Haven Clause 3, Verified Crews).
Pricing for Custom & Geometric Windows in Boulder City, NV
Written prices before work starts, always. Here are the ranges we typically see in Boulder City’s market:
- Arched or curved window, custom-ordered, installed: $2,400 – $5,600 per opening
- Geometric or shaped window, custom glazed, installed: $1,900 – $4,800 per opening
- Oversized picture or fixed opening, energy-efficient glass: $1,600 – $4,200 per opening
- Custom impact-rated unit meeting design pressure: $2,800 – $6,500 per opening
- Historic District design review support and documentation: $250 – $600
- Framing repair or code-upgrade allowance (priced in writing before we touch it): varies, always quoted in the contract
A full custom unit in the Historic District runs higher than the same opening in Whitney or Henderson because of the review, the non-standard rough opening, and the custom order. The measured survey and estimate are free, and you keep the survey. Bring us a competitor’s written quote and we’ll review it at no charge as a second opinion.
We Also Serve Cities Near Boulder City

We work the neighborhoods around Boulder City too, including Henderson, Whitney, Paradise, and Enterprise. The same Haven Standard applies, but the review board and the housing stock change. If your home is in one of those cities, see how Custom & Geometric Windows in Boulder City compares to what your jurisdiction requires, then call to schedule a survey.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Custom & Geometric Windows in Boulder City

Yes. A street-visible window replacement in Boulder City’s Historic District typically goes through design review, and a stock vinyl unit visible from the street can be rejected. We document the original profile and specify a matching custom unit. Call (844) 560-5201 for a free measured survey and we’ll tell you what the review will need.
Because the rough openings in pre-1940s Boulder City homes are non-standard, and the design review adds steps. Geometries run $1,900 – $4,800 per opening for shaped windows, higher for arched and impact-rated. Framing repair and code upgrades found after the wall opens are the biggest variable, and we price those in writing before touching anything. Call for an exact quote.
Low-E insulated glass with a low SHGC is what you want on a west-facing opening around 89005. In the 1960s-70s ranch homes where a slider was retrofitted without redoing the rough opening, a failed dual-pane seal is common. We specify by solar exposure, not by brand. Call for a free estimate and we’ll name the exact glass.
Yes, in most cases a custom impact-rated unit can be specified to match the profile. PGT and ViewLux both offer impact-rated product lines, and the unit has to hit the design pressure and match the elevation the committee sees. The measured survey tells us what’s possible on your opening. Call (844) 560-5201 to schedule yours.
Spring dust storms drive grit into the tracks and seals and wear out the sliding and casement hardware faster than in calmer climates. A worn seal lets water in. Hardened seals on a west-facing opening also crack in the heat. A custom unit made to your exact opening seals better than a retrofit slider. Call for a free estimate if yours are past due.
Ready to Schedule Your Free Estimate in Boulder City?
The price goes in writing before the first tool comes out. Call (844) 560-5201 to schedule your free measured survey and estimate. We’ll inspect the jamb and framing, document what we find, and quote the custom unit and any code-upgrade allowance in the same document. You keep the survey. And if you’d like a second opinion on any written estimate you already have, bring it.
Written by the team at Sightline Windows & Doors Summerlin.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services

