New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Fast, Reliable Custom & Geometric Windows Across Enterprise
Custom and geometric windows in Enterprise usually run $950 to $3,400 per opening installed, and the number that most often decides the job is not the rough opening – it’s your association’s approved color and profile list. We work Enterprise every week, and we know the review packet, the palette limits, and the west-facing elevation problems in the 89139 ZIP as well as anyone. That local read is why the written price we hand you matches the invoice after installation. Call (844) 560-5201 to schedule a measured survey.

Why Sightline Windows & Doors Summerlin Is Enterprise’s Preferred Custom & Geometric Windows Company

Enterprise homeowners research before they call, and they should. What we can show you in writing is the proof: 18,000+ openings installed since 2012, each one priced in writing before work started and each one photographed at completion. Our technicians have up to 14 years of experience. Every technician is background-checked, uniformed, and identified by license number before arrival – Haven Clause 3, Verified Crews, means the person at your door is the person on the record.
Enterprise customers also respond to how we communicate. Live phone coverage is available around the clock, and we answer with a person, not a callback queue. If you already have a competitor’s written quote for a shaped or oversized unit, bring it by for a free second opinion; we’ll review line by line against the survey. Our scheduling to Enterprise is straightforward – measured survey, architectural submittal, then a confirmed install date after approval, not before. The 365-Day Done Right Promise applies in writing on every job: if it’s not done right, we make it right. Custom & Geometric Windows
Before
AfterOur Custom & Geometric Windows Services in Enterprise
Most of what we do in Enterprise is retrofit work on stucco-clad homes built between roughly 1995 and 2010, so we plan every sub-service around re-squaring an old opening, not just dropping in a new unit.
Arched & Curved Windows in Enterprise
A half-round or eyebrow arch in Enterprise often lands on a front elevation where the association’s approved style list governs the profile. We template the curve from the existing opening after re-squaring the frame, because a builder aluminum frame that has baked in west sun for 25 years is rarely true. That step is what keeps an arched unit from looking out of plumb against the stucco reveal.
Geometric & Shaped Windows in Enterprise
Trapezoid, octagon, and triangular units are common in the two-story tract and semi-custom plans across Enterprise, especially over entry doors and stair landings. Each one is measured on site, then spec’d for glazing to suit its orientation – a south-facing geometric unit needs a different SHGC than a shaded north one. Fabrication starts only after the submittal clears.
Oversized Openings in Enterprise
Large rear-facing window walls and patio sliders are a defining feature of Enterprise housing stock. On an oversized replacement, we check structural load and the existing header before anything is ordered, and we measure for impact-rated or dual-pane low-E glass based on which way the glass faces. Monsoon gusts load these openings hard; the install has to be sealed to high-desert standards or the unit will rattle within a season.
Custom Impact Windows in Enterprise
Impact-rated glazing in Enterprise is a performance question, not a code reflex. Where a homeowner wants a shaped or oversized custom unit in a high-wind or dust-exposed spot, we spec a laminated or impact-rated assembly from PGT or CGI and confirm the SHGC so the room stays cool in July. Each spec is written into the survey you keep.
Trusted Brands We Service in Enterprise

We work with eight manufacturer lines, and we specify them by performance tier and price range rather than by margin. For shaped and arched work in Enterprise, that usually means PGT or CGI for impact-rated assemblies, ViewLux where a cleaner sightline and thinner sash suit a geometric profile, and Therma-Tru for the entry door that has to match the association’s approved color. We don’t stock parts locally; custom units are ordered to your measured spec after approval. That turnaround is measured in weeks, not months, because the order goes out behind a cleared submittal.

Common Custom & Geometric Windows Problems We See in Enterprise Homes
- West- and south-facing frames warping before the shaded sides. On Enterprise’s 1990s – 2000s stucco tract homes, builder aluminum and first-generation vinyl chalk, warp, and lose seal under unfiltered UV. A new shaped unit templated off a distorted opening will look crooked, so the opening gets re-squared first.
- Fogged insulated glass units on angled geometric glazing. Low humidity and relentless sun dry out the primary seal, and angled units fog faster than vertical ones. That’s why we spec and seal to the orientation of each piece.
- HOA submittal rejected for color or profile mismatch. Enterprise is almost entirely planned-community territory. A frame color or visible profile that doesn’t match the approved list can stall fabrication after the order is placed – which is why we build the review into the calendar from day one.
- Monsoon-season rattles and dried caulk lines. Seasonal gust events load oversized sliders and door sweeps. Where the install wasn’t sealed to high-desert standards, you get a fogged unit or a sash that won’t latch by the second summer.
Pricing for Custom & Geometric Windows in Enterprise, NV

Here is the pricing range you came for, stated plainly. Geometric and shaped windows in Enterprise typically run $950 to $2,200 per unit installed, depending on size and profile complexity. Arched and curved windows run $1,200 to $2,800, because the curved sash and frame work costs more to fabricate. Oversized openings and window walls run $2,400 to $3,400 for a standard slider or window wall, higher for custom spans. Custom impact units add roughly $400 to $900 per opening over standard dual-pane. What moves the number: the rough-opening condition, the glazing spec (SHGC and low-E tier), and whether the profile is custom-bent or a stock geometric. The written price cannot differ from your measured survey – Haven Clause 1. Call (844) 560-5201 for a free estimate; the survey is yours to keep.
We Also Serve Cities Near Enterprise
Enterprise jobs sit on the southwest edge of the valley, and we also work the neighboring communities of Spring Valley, Paradise, Winchester, and Henderson. If you’re near the 89139 ZIP and want a measured survey for a shaped or oversized unit, our Custom & Geometric Windows in Enterprise team covers the surrounding area. Call (844) 560-5201 to book.
Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Custom & Geometric Windows in Enterprise
We do. Sightline assembles and files the architectural review packet on your behalf, using the measured survey, product spec sheet, and frame color sample your association requires. You don’t chase the committee; the packet is part of the scope, and the written price covers the work whether or not the first review is approved.
Plan on roughly 2 to 6 weeks added to the front of the schedule for most Enterprise associations, depending on how often the architectural committee meets and how complete the packet is. That review time is why we file before fabrication starts. Bring us a competitor’s written estimate and we’ll review the timeline against the survey at no charge.
A west-facing arched window in Enterprise should get dual-pane low-E glass with a lower SHGC – typically in the 0.25 to 0.35 range – to manage the relentless afternoon sun. We confirm the spec against the unit’s orientation and write it into the survey. On an oversized west opening, an impact-rated laminated assembly from PGT or CGI is often the better call.
Usually yes, and we template from the existing opening to get the profile close. The one catch: a builder aluminum or early vinyl frame that has warped in the west sun is rarely true, so we re-square the opening before ordering. Matching profile and meeting the HOA’s approved color list both get checked on site.
Not always required, but strongly worth considering on west and south elevations. Enterprise sits in a high-wind and dust corridor, so impact-rated or laminated glass handles the seasonal gusts better than standard dual-pane. We’ll tell you which way your opening faces and what the spec should be. Call (844) 560-5201 for a free quote – estimates are free.
Every job in Enterprise starts with a measured survey you keep and a written price before any work starts. Call Sightline Windows & Doors Summerlin at (844) 560-5201 for a free estimate, and ask us about the 365-Day Done Right Promise and the documented photo record included on every visit.
Written by the team at Sightline Windows & Doors Summerlin.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services

