New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Fast, Reliable Custom & Geometric Windows Across Paradise
If you’re pricing a shaped, arched, or oversized opening on a Paradise home, the number you need is a written one: a template-measured scope that accounts for Clark County permitting and the frame condition behind the old glass. Sightline Windows & Doors Summerlin works Paradise regularly, from the mid-century blocks off Flamingo Road to the denser condo rows near the Convention Center, and we know why so many of these jobs start with a failed single-pane slider rather than a design idea. Call (844) 560-5201 and we’ll put a measured survey and a written price in your hands before anything is ordered.

Why Sightline Windows & Doors Summerlin Is Paradise’s Preferred Custom & Geometric Windows Company

Paradise is one of the most concentrated retrofit markets in the Las Vegas Valley, and we treat it that way. Much of the housing here predates 1990, which means the opening we’re quoting is usually original aluminum rather than a fresh rough-in, and the scope has to reflect that. Our technicians have up to 14 years of experience, and every one of them is background-checked, uniformed, and identified by license number before arrival, which is Haven Clause 3: the person at your door is the person on the record.
We answer the phone with a live person, 24/7, so a question about a 89105 permit submittal doesn’t sit in a voicemail queue. Every engagement begins with a measured survey you keep, and the written quote cannot differ from that document, because under the Haven Standard the measurement and the price are the same document. If you’ve already got a competitor’s estimate for a curved or oversized unit, we’ll review it free as a second opinion. And every completed job leaves a documented photo record and carries the 365-Day Done Right Promise: if it’s not done right, we make it right.
Before
AfterOur Custom & Geometric Windows Services in Paradise
Custom openings in Paradise are rarely a like-for-like swap. They’re a rebuild of an opening that’s been baking in desert sun for decades, and we scope each one against the frame, the rough opening, and the county review it triggers. Here’s what we handle most often.
Geometric & Shaped Windows
Trapezoids, polygons, half-rounds, and gable-window shapes all get templated on site in Paradise rather than ordered off a drawing, because the framed opening behind the old unit is often out of square by an inch or more. We measure the actual rough opening, confirm the design pressure the unit must meet, and specify from PGT or CGI by performance tier. That template travels with your survey, so if the opening needs correction, we correct the opening, not the order.
Arched & Curved Windows
A true radius or eyebrow arch on a Paradise home is a site-built opening, and the framing is where the job is won or lost. We check the spring line, the rise, and the flashing detail above the arch before specifying a unit, because a curve set into a bad header will leak at the first monsoon. Curved and radius units come from specialty lines like ViewLux, and lead time runs longer than a standard rectangle.
Oversized Openings
Wide sliders, stacked multis, and great-room openings in Paradise’s 1970s and 1980s stock usually sit behind failed original aluminum that has warped and lost its seal. The track, not the glass, is the problem. We rebuild and re-flash the rough opening, then set an impact-rated or low-E unit rated for the wind-load the opening sees. On acreage lots, staging and access get scoped before delivery day so a large unit doesn’t arrive damaged.
Custom Impact Windows
Large custom openings in Paradise still have to meet the large-missile impact rating the homeowner wants, and that rating has to match the design pressure of the opening, not just the glass. We specify impact-rated units from PGT and CGI, and we coordinate the framing, flashing, and inspection sequence so the performance claim holds up. A shaped impact window costs more to scope than a rectangle for exactly this reason.
Trusted Brands We Service in Paradise

We install and replace from eight manufacturer lines, and we specify by what the opening actually requires rather than what’s convenient. For Paradise’s geometric and curved work, that usually means PGT or CGI for impact-rated shaped units, ViewLux for radius and eyebrow arches, and CWS where a spec calls for it. We don’t hold parts stock and we won’t claim to; what we do is specify the correct line, order against the template, and move the job through county review so turnaround stays predictable. Every line we carry can be matched to your existing opening’s performance requirement.
Common Custom & Geometric Windows Problems We See in Paradise Homes
Here’s what actually fails on Paradise openings, and why the fix is usually a frame rebuild rather than a glass swap.

- Warped original sliders behind oversized openings. The single-pane aluminum that shipped with Paradise homes in the 1960s through 1990s warps and loses its seal in 105°F-plus heat. By the time you’re replacing it with a custom unit, the track and frame have to be rebuilt, not just re-glazed.
- Out-of-square framing on detached shops and ADUs. Site-built arches and radii on outbuildings across Paradise are often framed out of square, so a template-measured unit arrives and the rough opening has to be corrected rather than the window reordered. That correction is a real line item and we quote it up front.
- Long-haul delivery and tight equipment access. Large or curved units moving onto an open Paradise lot get damaged or mis-set when delivery and staging aren’t scoped alongside the grading and drainage plan. We plan the haul before the order goes out.
- Seal and weatherstripping failure from UV and low humidity. Glazing seals, weatherstripping, and door finishes degrade fast in Paradise’s desert sun. Solar control (low-E, SHGC) is usually the deciding specification on a replacement, not the frame color.
Pricing for Custom & Geometric Windows in Paradise, NV

Paradise is a built-out, resale-driven market, so most of our work here is retrofit rather than new construction, and the price reflects the frame rebuild more than the glass. A typical geometric or shaped window in Paradise runs $1,400 – $3,200 per opening installed, depending on size, shape, and whether the rough opening needs correction. An arched or curved unit runs $2,200 – $4,500 installed, with radius and eyebrow shapes at the top because of the template and lead time. An oversized slider or stacked multi runs $3,500 – $9,000, and a full slider-to-multipoint retrofit on an older Paradise home often lands $5,000 – $14,000 for the opening. Detached shops, outbuildings, and ADUs add a separate opening schedule and their own county review, which we scope before quoting. Every price is written before any work starts, and the estimate is free. Call (844) 560-5201 for a measured survey on your Paradise opening.
On acreage properties in Paradise, a shaped or oversized opening is rarely just a glazing swap. The old aluminum frame has usually warped and lost its seal in the desert sun, and the rough opening behind it must be re-squared and re-flashed before a laminated-glass or low-E insulated glass unit goes in. A qualified local pro typically templates the arched or curved opening on site, confirms design pressure and wind-load requirements for the large-missile rating the homeowner wants, and coordinates the county permit and inspection sequence for any detached structure the window serves. That sequence is why a custom opening in Paradise is scoped differently than a standard replacement.
One thing that only applies here: because Paradise is unincorporated, custom and geometric work on open-lot acreage is permitted through Clark County rather than a city building department, and detached shops, outbuildings, and ADUs each trigger their own separate opening schedules and setback checks before a single arched or oversized unit is ordered. If you’ve priced a project elsewhere and assumed the city would review it, the county process and the setback review on the detached structure are the line items that change the number. We scope both before a quote is issued.
We Also Serve Cities Near Paradise
Our Paradise work runs the same measured-survey process across the surrounding communities, including Winchester, Whitney, Spring Valley, and Enterprise. If your project sits on a lot that crosses a municipal boundary, we’ll confirm which jurisdiction reviews the permit before we quote. Reach our Custom & Geometric Windows team at (844) 560-5201 and we’ll scope it in writing.
Serving Paradise, NV – Our Local Coverage Area

We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Custom & Geometric Windows in Paradise
An arched window costs more to scope because the opening itself has to be templated on site and the framing checked for square before a unit is ordered. On Paradise’s older housing stock, the rough opening behind a radius is often out of square, and the flashing detail above the arch has to be rebuilt to hold through monsoon season. That template work, plus the longer lead time on radius units from ViewLux, is why an arched or curved opening in Paradise runs $2,200 – $4,500 installed versus $1,400 – $3,200 for a standard shaped unit. Call (844) 560-5201 for an exact quote on your arch; the survey and estimate are free.
Yes. Because Paradise is unincorporated, geometric and oversized window work is reviewed through Clark County rather than a city building department, and any detached shop, outbuilding, or ADU on the lot carries its own separate opening schedule and setback check. That means the permit sequence starts with the county and the setback review, not with the window order, and a unit shouldn’t be ordered until both clear. We confirm the jurisdictional review and scope the setback check into the written quote before work starts. Call (844) 560-5201 and we’ll walk your lot through it.
For a large custom opening in Paradise, low-E insulated glass with a solar heat gain coefficient (SHGC) tuned for desert exposure makes the most sense, and impact-rated laminated glass where the opening needs large-missile protection. Paradise’s summer highs run above 105°F with intense UV and low humidity, so solar control is the deciding specification, not the frame color. We specify SHGC and U-factor by opening and confirm the design pressure matches the wind-load rating you want. Bring us your existing quote and we’ll review the glazing spec free as a second opinion.
In most cases, yes. If your Paradise home already has PGT, CGI, CWS, or ViewLux units on the openings, we can match the line and performance tier for a new shaped or oversized unit, and we’ll tell you up front if the existing framing can’t take a match. We don’t hold parts stock, so timing depends on the manufacturer’s lead time on the template-measured unit. Call (844) 560-5201 with the brand and opening size and we’ll confirm what’s possible.
Grading and drainage affect a custom window quote in Paradise because a large or curved unit has to arrive undamaged and be set on a level, drained opening, and on an open lot that means planning the haul, staging, and site drainage before delivery day. If water pools against a detached structure or the access is too tight for a full-size unit, the delivery and setting plan changes, and that’s a real line item. We scope grading, access, and drainage into the written quote so there’s no change order once the truck is loaded. Call (844) 560-5201 to schedule your free estimate.
Ready to price a shaped, arched, or oversized opening on your Paradise property? Call (844) 560-5201 for a free estimate. A live person answers around the clock, your measured survey and written price arrive before any work starts, and the quote you sign is the one on the invoice. We’ll scope the county permit, the setback check, and the haul alongside the glazing spec, so the number you get is the number you pay.
Written by the team at Sightline Windows & Doors Summerlin.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services

