New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Impact Windows & Doors in Summerlin: What to Know First
Impact window and door work on CGI products in Summerlin typically runs $430 to $1,150 per opening for repair and $720 to $2,400 per opening for full replacement, scheduled within about two to three weeks for standard configurations and longer when custom sizes or specialty glass are involved. We’re an independent CGI service provider, so we quote from a measured survey you keep and the price is written before anything starts. This page is for Summerlin owners whose homes already have CGI impact-rated windows or doors and need them repaired, matched, or replaced. Call (844) 560-5201 for a free estimate.
Key Takeaways
- CGI impact windows fail in ways that are specific to the brand: gasket compression, sash balance drift, and interlayer haze from reflected desert sun.
- Summerlin’s west-facing elevations take the worst of it, and the failure pattern follows elevation, not age.
- Repair makes sense when the frame and glass are sound; replacement makes sense when the interlayer or the frame extrusion is compromised.
- Every job ends with a written scope, a photo record, and the 365-Day Done Right Promise.
How CGI Products Fail – and How We Fix Them

CGI builds impact-rated aluminum and vinyl products for coastal code markets, and Summerlin’s desert exposure produces a different failure sequence than the salt-and-wind environment those products were engineered against. That difference is what our technicians look for first.
- Gasket compression on CGI single hung impact windows. The bulb seal between sash and frame flattens from repeated thermal cycling, which in Summerlin is a daily event between dawn and midafternoon. You’ll notice a low whistle on windy days or dust filming the interior sill. We replace the gasket with a like-for-like profile rather than a generic foam weatherstrip that loses its memory in two summers.
- Balance drift on CGI double hung impact units. The sash constant-force balance loses tension as the spiral relaxes, and a heavy laminated impact sash accelerates that. The symptom is a sash that won’t stay up or drops the last three inches. We replace the balance and re-tension to the sash weight rather than the model spec, because the laminated glass is heavier than the standard chart assumes.
- Interlayer haze and edge delamination on CGI horizontal roller and sliding impact units. The PVB interlayer in older laminated impact glass can cloud along the perimeter where reflected heat concentrates on west and southwest elevations. This is not a cleaning problem and it cannot be polished out. We confirm it with a sightline inspection and a heat-lamp check before recommending glass replacement.
- Weep and drainage path failure on Summerlin stucco walls. CGI sliding impact doors installed without a properly back-sloped sill trap monsoon water, and the track corrodes from the inside. We cut the sill to drain, reseal with a compatible sealant, and verify with a water test before closing the opening.
- Anchor and shim degradation at the rough opening. Composite shims crush and anchor heads pull through on older CGI frames when the wall has settled. We re-shim to the measured sightline, replace the anchors, and document the frame deflection readings in the photo record so the correction is on file.
Before
AfterOur CGI Impact Windows & Doors Process
- 1
Measured survey. We measure every opening, record the CGI model and series stamped on the frame, and photograph existing conditions. You keep this document, and per Haven Clause 1, the written price cannot differ from it.
- 2
Diagnostics and root cause. We test what’s actually failing: gasket profile, balance tension, glass edge seal, sill drainage, and frame deflection. We name the cause in writing rather than quoting a replacement reflexively.
- 3
Parts decision. Where an OEM CGI component is available, we quote it. Where it isn’t, or where lead time would leave an opening compromised, we specify a quality aftermarket equivalent and say so plainly, along with the warranty implication either way.
- 4
The repair or replacement. Background-checked, uniformed technicians, license numbers on the record before arrival. Work is sequenced around the opening so the home stays sealed overnight.
- 5
Testing and verification. We water-test sills, check sash travel and lock engagement, and confirm the impact rating documentation for any replaced glass.
- 6
Documentation and cleanup. A full photo record, the written warranty, and the 365-Day Done Right Promise on the job.
What CGI Impact Windows & Doors Costs in Summerlin

These are the ranges we write most often in Summerlin. Actual pricing depends on opening size, elevation, glass spec, and whether the frame is reusable.
- Gasket or weatherstrip replacement, per CGI opening: $430-$620
- Balance replacement on CGI double hung impact units: $480-$720
- Sill rebuild and drainage correction on sliding impact doors: $580-$890
- Glass-only replacement, CGI impact unit, laminated: $760-$1,480
- Full CGI impact window replacement, standard size: $720-$1,750
- Full CGI impact door replacement, sliding or patio: $1,400-$2,400
What moves the price: custom widths, tempered or Low-E upgrades, second-story access, and whether the stucco opening needs a new buck. Call (844) 560-5201 for a free estimate, and bring any competitor’s written quote for a free second opinion.
Why Summerlin Homeowners Call Sightline Windows & Doors Summerlin for CGI Work
We specify eight manufacturer lines (PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux), which means we recommend what the opening requires rather than what’s in stock. On a CGI job, that distinction matters: sometimes the right move is to match the existing CGI series, and sometimes it’s a CWS or ES Window unit that fits the frame better at a lower price. We tell you which and why, in writing. Our technicians have up to 14 years of experience, our crews are background-checked and uniformed, and live phone coverage answers around the clock. Every Summerlin job carries the documented photo record and the 365-Day Done Right Promise. We’re proud to work in Summerlin and around Clark County.
FAQs

A properly executed repair by a qualified installer using compatible components generally does not void the CGI warranty, but using non-compatible sealants or aftermarket glass without matching impact documentation can. We document every part we install so the warranty trail stays intact. Call (844) 560-5201 for a free review.
Most gaskets, balances, and hardware profiles are still available; some glass interlayer specs from older runs are not. When an OEM part isn’t available, we specify a verified aftermarket equivalent and note the warranty implication in writing. Call (844) 560-5201 and we’ll check your specific series.
Repair when the frame, glass, and interlayer are sound and the failure is hardware, gasket, or drainage. Replace when the interlayer has clouded, the frame extrusion is deformed, or the glass no longer carries its impact documentation. Call (844) 560-5201 for a measured diagnosis and a written recommendation.
Standard repairs are typically scheduled within two to three weeks of the measured survey, and replacement runs four to six weeks depending on glass and lead time. That’s a typical turnaround, not a promise; larger or custom jobs take longer. Call (844) 560-5201 to schedule.
No. We are an independent CGI service provider and are not affiliated with or authorized by the manufacturer. We work on CGI products alongside seven other lines and specify based on what the opening needs. Call (844) 560-5201 for a free estimate.
Get a Written Price on Your CGI Impact Windows & Doors in Summerlin
Whether your CGI single hung impact windows need a gasket rebuild or your sliding impact doors need full replacement, the first step is the same: a measured survey you keep, a written price before any work starts, and a documented photo record when it’s done. Call (844) 560-5201 for a free estimate, or bring us any competitor’s written quote for a free second opinion. We’re ready to look at your Summerlin opening.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
What Neighbors Say About Sightline Windows & Doors Summerlin
