New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CWS Window Installation: The Summerlin Owner’s Guide
CWS window installation in Summerlin typically runs $780 to $2,400 per opening, installed, depending on whether you’re replacing glass units, moving to impact-rated assemblies, or ordering custom sizes for the estate lots west of the 215. Same-day service applies only to glass-only swaps where the frame is sound; full window replacements are scheduled, not dispatched. You’ll know it’s time when you notice condensation trapped between panes, a window that won’t latch in summer heat, or a hairline crack that appeared after a monsoon gust rather than a rock.
Sightline Windows & Doors Summerlin is an independent installer and is not affiliated with CWS.
Which CWS Models This Applies To

CWS builds for the Southwest, and that matters: their series line is specified around desert thermal cycling, not coastal salt air or northern freeze-thaw. The window models Summerlin homeowners most often have are the single-hung and horizontal slider series, plus the fixed and awning units in two-story great rooms. Identification is on the etched label in the upper corner of the glass or, if that’s gone, on the manufacturer sticker inside the jamb.
Two gotchas we see constantly in Summerlin. First, CWS has changed frame profile depths across production runs, so a 2016 slider sash won’t necessarily seat in a 2019 frame, even when the rough opening is identical. Second, the label number tells you the series, not the finish – “bronze” on a CWS label covers three anodized and painted variants that don’t touch up the same way. Measure the visible glass, not the frame, and photograph the label before you call anyone.
The OEM-versus-aftermarket call is genuine here. OEM glass assemblies carry the factory glazing seal, which is what fails first in Summerlin’s UV load. Quality aftermarket units from a line like CGI or ES Windows can outperform the original on SHGC (solar heat gain) for west-facing rooms, and we’ll say so plainly when that’s the better answer for the opening.
Before
AfterSigns Your CWS Window Installation Is Failing
- Fogging or condensation inside the sealed unit. The desiccant in the spacer has saturated and the perimeter seal has broken. Once moisture is inside, it doesn’t dry out – the unit needs replacement.
- A window that drags or won’t latch in July but works in January. Vinyl frames expand under Summerlin’s summer heat more than the hardware tolerance allows. It’s usually an alignment or roller issue, not a “the whole window is bad” issue.
- Visible water staining on the interior sill after a storm. The weepholes are blocked or the sill pan was never installed correctly at the original build. This one gets misdiagnosed as a “bad window” roughly half the time.
- A hairline crack radiating from a corner of the glass. Thermal stress cracks start at edges, not centers, and they spread. A crack is a replacement, not a repair.
- Drafts you can feel with the back of your hand at the meeting rail. The weatherstripping has compressed. Cheap fix, but it points to a sash that needs reseating if the gasket keeps failing.
One reality specific to Summerlin: the estate lots backing the Red Rock foothills catch more wind-driven dust than the valley floor, and that grit works into slider tracks and wears the rollers faster than the same window would age three miles east. If your sliders are on the west or southwest exposure, expect hardware wear before glass failure.
Replacement Cost & What’s Included

What drives the range is the opening, not the brand. Here’s how Summerlin pricing actually separates:
| Scope | Installed Range |
|---|---|
| Sealed glass unit replacement only (frame reused) | $780 – $1,150 |
| Single-hung or slider sash replacement | $950 – $1,450 |
| Full window replacement, standard size | $1,400 – $2,400 |
| Impact-rated or custom-size unit | quoted per opening after measured survey |
Every engagement starts with a measured survey you keep, and the written price is on that document before any work begins – the quote and the measurement are the same piece of paper. The price covers removal and disposal, any required permit, installation, and the finish work. Our technicians have up to 14 years of experience, they’re background-checked and uniformed, and their license numbers are on the record before arrival. Every completed job leaves a documented photo record and is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Here’s the honest split. You can safely clean weepholes, clear the slider track with a vacuum and a nylon brush, re-tension a roller if you know the adjustment screw, and swap weatherstripping. You can check a label, photograph it, and measure the visible glass to speed up a quote. None of that requires a professional.
Where it goes wrong is glass. A sealed unit is heavy, awkward, and unforgiving – drop it and it’s a $900 mistake, and the wrong shim job cracks it six weeks later when the frame racks in the heat. Removing a full frame that was set into a stucco opening risks the neighboring wall, and anything above ground floor is a fall hazard and a two-person lift done from outside. We won’t hand out a method for that part.
When you’re ready, call (844) 560-5201 for a free estimate. Bring a competitor’s written estimate and we’ll give you a free second opinion on it before you decide.
FAQs

Expect 20 to 25 years for a well-installed CWS unit on most exposures, but 15 to 18 on unshaded west and southwest walls where UV and heat cycling are heaviest. Sealed glass units typically fail earlier than the frame; the frame itself often outlasts the glass by a decade.
Yes, in specific cases: failed weatherstripping, worn rollers, and misaligned sashes are repair-or-reseat jobs. Fogging, cracked glass, and a broken perimeter seal in the unit cannot be repaired – those are replacements. We’ll tell you which one you have in writing.
A single glass-only swap runs about an hour once the unit is on site. A full window replacement is two to three hours per opening, with same-day completion for single-window jobs. Custom and impact-rated units are ordered after the measured survey, so plan on a lead time before install day.
We order to the measured opening from eight verified manufacturer lines – CWS among them, alongside PGT, CGI, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux – selected by performance tier and price, not by what’s in stock. We don’t keep parts on hand, so everything is specified to your label and your measurements.
Call (844) 560-5201 to schedule your free estimate. A live person answers around the clock.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
