New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
ES Windows Custom & Geometric Windows in Summerlin: What to Know First
We install and replace ES Windows custom and geometric windows in Summerlin, and most jobs run two to five weeks from measured survey to final walkthrough, with the exact number written into your quote. Geometric openings – arches, half-rounds, trapezoids, eyebrow curves – take longer than rectangles because each unit is built to order and the frame opening has to match the radius to within a tolerance. The price is written before any tool comes out, and it doesn’t move once work starts. Call (844) 560-5201 and we’ll set the measured survey.
This page is for Summerlin homeowners who already have ES Windows units in the wall, or who want them, and are working through a curved, angled, or oversized opening that a stock-size window can’t fill. As an independent ES Windows service provider, we aren’t affiliated with or authorized by ES Windows – we specify their lines by what the opening requires, alongside PGT, CGI, CWS, and ECO Window Systems.
How ES Windows Products Fail – and How We Fix Them

Custom and geometric ES Windows units behave differently from stock rectangles, and the failure modes follow the shape. Here’s what our technicians actually find on Summerlin jobs, and what we do about it.
- Failed seals on arched and radius units (ES Windows 3000 and 5000 series). A curved head or eyebrow unit is built from bent frame stock and glazed into a radius, and the sealant bead at the curve is the first place water finds a way in. After a decade of Summerlin’s summer heat cycling the frame and our occasional winter wind-driven rain, that bead shrinks and pulls. You’ll see a faint water line inside the head, not a puddle. We re-glaze and re-seal the curved perimeter to the OEM specification rather than caulking over the gap.
- Fogged insulated glass in geometric units. When the seal on a dual-pane sealed unit fails, moisture gets between the panes and the unit fogs from the edges in. On a rectangular window that’s a straightforward glass swap. On a shaped unit the insulated glass assembly is cut to the radius, so the replacement has to be built to the same template, and that’s a lead-time item, not a shelf item. We measure the existing unit and order the glass to match; we don’t try to force a square lite into a curved sash.
- Frame distortion at oversized openings. Big custom units – a two-story great-room window, a wide mulled assembly – carry more weight on the frame than a standard unit, and if the rough opening settled or the shims compressed, the sash racks out of square. You’ll notice the operable panel dragging or the lock not catching. The fix is re-setting and re-shimming the frame plumb and square, not bending hardware back into place.
- Hardware and operator wear on casement and awning custom units. ES Windows casement and awning operators, hinges, and multi-point locks wear at the pivot points, and a binding sash accelerates it. We replace with OEM hardware where the part is still produced, and with a quality aftermarket operator matched to the same throw and mounting pattern where it isn’t – and we tell you which one you’re getting before we order.
- Finish and trim failure at the exterior. Summerlin’s UV load is hard on exterior finishes and on the seal between frame and stucco. Where a geometric unit meets a curved stucco return, the joint is the weak point. We inspect the perimeter flashing and the stucco-to-frame seal, not just the window, because a water problem that starts at the wall shows up at the window.
Before
AfterOur ES Windows Custom & Geometric Windows Process
Every ES Windows job under the Haven Standard follows the same sequence, and the measured survey you get at step two is the document your final invoice has to match.
- 1
The call. A live person answers, day or night, and we book a measured survey rather than quoting over the phone. Nobody can price a radius opening without seeing it.
- 2
The measured survey. We measure the opening – width, height, radius, springline, jamb depth, sightline – and check the existing frame for plumb, square, and water intrusion. You keep this document. Per Haven Clause 1, Have It In Writing, the survey and the quote are the same record.
- 3
The written quote. We name the ES Windows line, the glazing spec (U-factor and SHGC, explained in plain terms), the hardware, the lead time, and the dollar figure – before any work starts. If you have a competitor’s estimate, we’ll review it free.
- 4
The crew. Background-checked, uniformed technicians, identified by license number before they arrive – Haven Clause 3, Verified Crews.
- 5
The install or repair and the test. We set or service the unit, then water-test the perimeter and cycle every operable sash and lock before we call it done.
- 6
The record and the promise. You get a documented photo record of the work and the 365-Day Done Right Promise: if it’s not done right, we make it right. Haven Clause 4, Evidence On Every Job.
What ES Windows Custom & Geometric Windows Costs in Summerlin

Here are the ranges we see on Summerlin jobs. Every one of these is a written, fixed price before work begins – no change orders once the crew is on site.
| Scenario | Typical range |
|---|---|
| Re-glaze and re-seal a curved or arched unit | $450 – $1,100 per opening |
| Replace fogged insulated glass in a geometric unit (built to template) | $600 – $1,600 per unit |
| Replace ES Windows casement/awning operator and hardware | $180 – $420 per unit |
| Re-set and re-shim an oversized or out-of-square custom frame | $500 – $1,400 per opening |
| Full custom or geometric ES Windows replacement (per unit, installed) | $1,200 – $4,500+ depending on size, shape, and glazing |
What moves the price: the radius and complexity of the shape, whether the insulated glass has to be built to a template, impact-rated versus standard glazing, and whether the frame itself has to come out. Curved and oversized units cost more because they’re made to order. Call (844) 560-5201 for a free estimate with the dollar figure written on the page.
Why Summerlin Homeowners Call Sightline Windows & Doors Summerlin for ES Windows Work
We’ve completed more than 18,000 windows and doors since 2012, and every one carries the same two things: a written price before work started and a documented photo record when it finished. On ES Windows custom and geometric work, our technicians – up to 14 years of experience on shaped and oversized openings – know that a curved unit fails at the seal and the template, not the glass alone, so we look at the whole opening. The 365-Day Done Right Promise is stamped on every job under the Haven Standard, not offered as a courtesy. And because we spec eight manufacturer lines – PGT, CGI, CWS, and ECO Window Systems among them – if an ES Windows part is discontinued or the lead time doesn’t work, we can tell you what the alternative costs. A live person answers our phone 24/7. No surprise on your invoice, ever – that’s Haven Clause 5.
FAQs

Using OEM parts on a repair keeps your ES Windows warranty intact; the risk is aftermarket hardware installed incorrectly, which can void coverage on the affected assembly. As an independent service provider we use OEM parts where they’re still produced and tell you in writing when we substitute a quality aftermarket part. Call (844) 560-5201 and we’ll review your warranty position in the free estimate.
Yes. Shaped insulated glass is built to a template rather than taken off a shelf, so expect a build lead time, typically a couple of weeks. We measure the existing unit and order the glass to the same radius. Call (844) 560-5201 for the current lead time on your specific shape.
Repair makes sense when the frame and glazing are sound and only hardware, sealing, or one sealed unit has failed; replacement makes more sense when the frame is out of square, water intrusion has reached the wall, or the unit is beyond its service life. We’ll tell you which one the opening actually needs. Call (844) 560-5201 for a free estimate with both numbers written out.
A hardware or re-glaze repair is often a single visit; a geometric replacement runs two to five weeks from survey to install because the unit is built to order. The exact schedule is written into your quote. Call (844) 560-5201 to book the measured survey.
No. Under Haven Clause 1 the measured survey and the written quote are the same document, and the figure doesn’t move once work begins. Call (844) 560-5201 for a free estimate.
Whether your ES Windows opening is a fogged eyebrow above a Summerlin entry or a two-story curved great-room window that won’t sit square, the next step is a measured survey and a written price. Call (844) 560-5201 for your free estimate – we’ll put the dollar figure in writing before anyone touches the wall.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
