New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Energy-Efficient Windows in Summerlin: What to Know First
We’re an independent Mr-Glass service provider, which means we install and replace Mr-Glass energy-efficient windows across Summerlin without manufacturer authorization or affiliation. Most single-window replacements run a scheduled visit with the written price agreed before we arrive, not a same-day drop-in. Glass units and full-frame jobs take longer because the measured survey has to match the order spec exactly.
This page is for Summerlin homeowners who already own Mr-Glass windows, know the units and want to upgrade or replace them for real energy performance rather than a sales pitch. We name prices in dollars below, in keeping with Haven Clause 1: have it in writing. Call (844) 560-5201 and a live person answers.
How Mr-Glass Products Fail – and How We Fix Them

Mr-Glass windows in Summerlin tend to fail in ways that track the desert climate more than any single defect. The five symptoms below are the ones our technicians see most often on Mr-Glass openings, and what each one usually means once we get the frame apart.
- Seal failure and fogging between the panes. On Mr-Glass insulated glass units in Summerlin, the butyl perimeter seal gives up sooner than the glass itself. Summerlin’s daily swing between 100°F afternoons and 65°F nights works the seal until the desiccant saturates and the cavity fogs. We replace the IGU with a Low-E, argon-filled unit matched to the original sightline, not a single-pane patch.
- Solar heat gain that wasn’t there before. A Mr-Glass window with a degraded Low-E coating or a failed cavity still looks clear, but its SHGC (solar heat gain coefficient) climbs and the room runs hot. We meter the existing glass before ordering, so the replacement coating matches the west-facing exposures Summerlin homes actually have.
- Weep and drain-path failures around the sill. Mr-Glass units set in stucco openings collect wind-blown dust in the sill weeps, and once the drain path clogs, water pools against the frame foot. That’s a frame-life problem disguised as an energy problem. We clear and re-flash the sill, then verify drainage before we close the opening.
- Perimeter air infiltration at the frame-to-wall joint. The draft around a Mr-Glass window is usually the joint, not the sash. Polyurethane foam, a proper backer and a continuous air seal fix it. This is the cheapest energy gain available on most Summerlin Mr-Glass jobs, and the one most often skipped.
- UV fade on interior finishes. Mr-Glass glass with a worn coating lets ultraviolet through that the original spec blocked. Faded wood floors and furniture near west windows are the tell. We specify a laminated or coated glazing with a stated UV-blocking figure so the replacement does what the original was rated for.
Before
AfterOur Mr-Glass Energy-Efficient Windows Process
Every job starts with a measured survey you keep. The written quote cannot differ from that document, and that’s Haven Clause 1 in practice. From there:
- 1
Diagnose the actual failure. We meter the existing glass, read the frame and check the air seal. We report what we found, not what we felt about it.
- 2
Decide parts on the record. Where a Mr-Glass-compatible OEM component is the right call, we say so. Where a quality aftermarket IGU or seal meets the same spec for less, we say that too, and we name the difference in writing.
- 3
Confirm the spec with you. U-factor, SHGC, glazing type and frame prep are on the page before we order. You approve the numbers, not a verbal estimate.
- 4
Install with a verified crew. The technician arrives uniformed, background-checked and identified by license number before he touches the opening. Haven Clause 3: the person at your door is the person on the record.
- 5
Test and document. We check drainage, air seal and operation, then leave a photo record of the install. Evidence on every job is Haven Clause 4, standard, not an upsell.
- 6
Stand behind it for 365 days. If it’s not done right, we make it right. That’s written into the Haven Standard, not a verbal assurance.
What Mr-Glass Energy-Efficient Windows Costs in Summerlin

Summerlin pricing tracks the glass, the frame prep and the number of openings. Here’s what typical Mr-Glass energy-efficiency work runs:
| Job | Typical range |
|---|---|
| Insulated glass unit (IGU) replacement, Low-E + argon | $320 – $780 per unit |
| Full-frame Mr-Glass energy-efficient window replacement | $850 – $1,900 per opening |
| Perimeter air-seal and sill re-flash (single opening) | $180 – $420 |
| Solar-control or tinted glass upgrade | $420 – $1,100 per unit |
| Window energy audit with U-factor / SHGC readings | $150 – $300 |
What moves the price: the Mr-Glass series and frame material, whether the opening needs any reframing, the glazing spec (laminated and solar-control cost more than standard Low-E), and the quantity. Heights, second-story access and complex summerlin geometry add labor. Call (844) 560-5201 for a free estimate. We write the price before any work starts, and a free second opinion on any competitor’s written estimate is available too.
Why Summerlin Homeowners Call Sightline Windows & Doors Summerlin for Mr-Glass Work
We’re independently owned and operated under the Haven Standard, which has governed every installation we’ve completed since 2012. That’s the entire proof point: 18,000+ windows and doors installed, every one with a written price before work started and a documented photo record when it finished.
Our technicians have up to 14 years of experience, and they know the Mr-Glass lines Summerlin homeowners actually own. If a Mr-Glass part is on back order or a full-frame replacement turns out to be the right call, we also install PGT, CGI, CWS and ES Windows. We specify by what the opening requires, not by what’s in stock. Live phone coverage answers 24/7, and every completed job is covered by the 365-Day Done Right Promise.
FAQs

Not if the replacement meets the original spec, and we verify that before ordering. Replacing the whole frame with a non-Mr-Glass product can affect warranty coverage, so we check the unit’s spec and tell you in writing what the change means before any work starts. Call (844) 560-5201 for a free estimate and a spec review.
Yes, for most Mr-Glass series. We source Mr-Glass-compatible units and match OEM specs where required, or supply a quality aftermarket IGU that meets the same U-factor and SHGC. When an aftermarket part meets the spec for less, we say so. Call for a free estimate to confirm availability on your specific series.
Repair the insulated glass unit if the frame and sash are sound; replace the whole window if the frame is warped or the sill is failing. A failed IGU on a healthy frame is a $320 – $780 fix; a failed frame is a replacement. We meter the unit and tell you which you’re looking at. Call (844) 560-5201 for a free estimate.
A Low-E, argon-filled IGU replacement runs $320 – $780, and a full-frame replacement runs $850 – $1,900 per opening. Solar-control and laminated glass push the upper end. Call (844) 560-5201 for an exact quote; estimates are free and in writing.
A single-unit replacement is typically scheduled once the spec is approved and the part is in; full-frame work takes longer because the order and the measured survey have to match. We confirm the timeline in writing before any work starts. Call (844) 560-5201 to schedule your free estimate.
If your Mr-Glass windows in Summerlin are fogging, running hot or fading your floors, the fix starts with a measured survey and a written price, not a sales call. We keep the survey and the quote on the same document, stand behind every job for 365 days and leave a photo record when we leave. Call (844) 560-5201 for a free estimate, and a live person will pick up.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
