New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Therma-Tru Impact Garage Doors: The Summerlin Owner’s Guide
Therma-Tru impact garage doors are typically installed in Summerlin at $2,400 to $5,800 per single-car opening, depending on door series, glazing package, and whether the opening needs reinforcement to meet local wind-load requirements. If a part has failed – a torsion spring, a hinge, a roller, a bottom seal, or a section joint – we can usually identify the exact replacement and schedule installation within the same week for standard Therma-Tru configurations. Most Summerlin owners discover the failure the same way: the door stops reversing on the safety test, one side hangs 2 to 4 inches lower than the other, or a spring gives a single loud snap at 6 a.m. and the opener runs but the door doesn’t move.
Key Takeaways
- Therma-Tru impact doors in Summerlin use specific spring, hinge, and roller specs that don’t interchange with non-impact models.
- OEM parts match the original warranty path; quality aftermarket parts cost less but must be matched by wire gauge and coil count.
- High-tension garage springs and cables are genuinely dangerous – we replace them, we don’t coach DIY replacement.
- Upfront written pricing and a documented photo record come with every job under the Haven Standard.
Which Therma-Tru Models This Applies To

Therma-Tru’s impact-rated garage door line includes models across its Fiber-Classic, Smooth-Star, and fiberglass impact series, and the parts that fail – particularly torsion springs, hinges, rollers, and bottom astragal seals – are not interchangeable across those families. A spring rated for a Smooth-Star impact door with a standard glaze package will not correctly balance the same door with a full-view aluminum frame; the coil count and wire gauge differ, and putting the wrong spring on the wrong door is the single most common cause of premature failure we see in Summerlin.
To identify the right part, check four things before you order: the interior label on the top section (it names the model and wind-load rating), the door height and width measured at the opening (not the section), the spring’s wire diameter stamped or printed on the coil, and the hinge stamp on the barrel. If the label has worn off, the section weight and sightline measurements are enough to identify it. On OEM versus aftermarket: OEM parts keep you in the original warranty path and fit first time; quality aftermarket equivalents run 20 to 30 percent less and are fine for hinges and rollers, less so for springs where gauge precision matters. We install Therma-Tru-compatible parts but are an independent service provider, not affiliated with Therma-Tru.
Before
AfterSigns Your Therma-Tru Impact Garage Door Is Failing
- Loud snap, then the door won’t lift. A torsion spring has broken. The opener motor runs but the door stays down because the spring is what carries the door’s weight – the motor only moves it.
- Door hangs unevenly or binds on one side. Usually a stretched or fatigued spring on one side, or a bent hinge barrel. In Summerlin’s heat swings, torsion springs routinely fail 2 to 4 years earlier than the standard 7 to 9 year rating.
- Grinding or squealing as the door travels. Worn steel rollers or dry nylon rollers. Left alone, the friction wears the track and the hinge plates.
- Daylight visible at the bottom corners. A compressed or torn bottom astragal. In impact-rated doors this seal is part of the wind barrier – a failed seal can compromise the door’s rated performance.
- Safety reverse fails or the door closes on contact. The photo-eye or the opener’s force setting is out of tolerance. This is a real safety issue and needs a technician, not a reset.
Replacement Cost & What’s Included

Typical installed pricing for Summerlin:
- Torsion spring replacement (pair): $320 to $520, including labor and balancing.
- Hinge or roller set (six rollers): $180 to $340.
- Bottom astragal seal: $160 to $290.
- Full impact door replacement (single-car): $2,400 to $5,800.
What drives the range: door weight and wind-load rating, spring type (standard versus high-cycle), whether the track needs realignment, and any opener reprogramming. Every job begins with a measured survey you keep, and the written quote cannot differ from that document – Haven Clause 1. Background-checked, uniformed technicians with license numbers on the page handle the work, and every job carries the 365-Day Done Right Promise plus a documented photo record when it’s done.
DIY or Call Us?
Honest split: you can safely check the safety reverse by placing a 2×4 flat in the door’s path and confirming the door reverses on contact. You can test the photo-eyes by waving an object across the beam. You can inspect the bottom seal and the rollers with the door up and the opener disconnected, and note any torn rubber or flat-spotted wheels. What you should not do is touch the torsion spring or the cables. A torsion spring on a Therma-Tru impact door is under hundreds of pounds of tension and can release with enough force to break a wrist or worse – this is the part where DIY goes wrong, and it isn’t the place to test your courage. Spring and cable work needs a trained technician. If you’re in Summerlin and something on the door has failed, call Sightline Windows & Doors Summerlin at (844) 560-5201.
FAQs

Most parts last 7 to 9 years under normal use, but Summerlin’s summer heat and the dry-to-monsoon humidity swing shorten torsion spring life to about 5 to 7 years – we replace more springs here than any other part. Quality aftermarket springs rated for 25,000 cycles run longer than the OEM standard. Call (844) 560-5201 for an exact quote on the parts for your model.
Sometimes. Hinges and rollers can often be re-bushed or adjusted; a bottom seal can occasionally be re-seated. Springs and cables are replaced, never repaired – a fatigued spring will fail again within months. We’ll tell you honestly which path is right for your Summerlin door. Estimates are free and written before any work starts.
A spring pair is typically 1 to 2 hours; a hinge or roller set is 30 to 60 minutes; a bottom seal is 20 to 40 minutes. We schedule most standard replacements within the same week in Summerlin, and we answer the phone live, 24/7.
We match the part to your specific Therma-Tru model and wind-load rating, order from verified suppliers of OEM or quality aftermarket equivalents, and confirm fit before we arrive. Bring us a competitor’s written estimate and we’ll give you a free second opinion – the price is written before any tool is lifted, always.
Whether you need a single spring, a roller set, or a full impact door replacement, Sightline Windows & Doors Summerlin handles it under the Haven Standard – written price before work, verified crews, documented photo record, and the 365-Day Done Right Promise. Every engagement begins with a measured survey you keep. Call (844) 560-5201 for a free estimate.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
