New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Therma-Tru Custom & Geometric Windows in Summerlin: What to Know First
We install and repair Therma-Tru custom and geometric windows in Summerlin as an independent Therma-Tru service provider. Most shaped and oversize units are templated and ordered within a week, and installed a few weeks later once the glass arrives; a repair on an existing unit is usually a single visit. Pricing is written before any work starts, always: shaped glass is a real cost, and we’d rather you see the number on paper than hear it after the fact.
This page is for Summerlin homeowners who already own a Therma-Tru product – a shaped transom, an arched assembly over an entry, an oversize picture unit – and need it repaired, re-glazed, or matched with new geometry that reads as original to the house. Call (844) 560-5201 and you’ll get a live person, not a queue.
How Therma-Tru Products Fail – and How We Fix Them

Therma-Tru builds a good door and window, but shaped and oversize units in a desert climate fail in specific ways. Here’s what we actually find on Summerlin jobs and how we handle each one.
- Arched and radius units losing their seal at the spring line. On Therma-Tru arched and curved assemblies, the highest point of the arch takes the most sun and the most thermal movement. The glazing seal there dries and pulls before anywhere else on the frame, and you’ll see it first as a faint white haze inside the glass, not as a drip. We re-glaze the unit rather than patch the bead, because a patch buys one summer in Summerlin before it fails again.
- Fiberglass door slabs with a bowed or twisted frame. Therma-Tru’s fiberglass entry lines are common on Summerlin homes built in the 2015-2025 window, and an oversize slab on a south-facing wall can bow by a few sixteenths over years of heat cycling. That bow throws the sidelight geometry off and the door starts rubbing at the top corner. We measure the frame in three planes and correct the opening before we touch the slab – replacing the door onto a warped frame is how you get the same rub back in eighteen months.
- Trapezoid and angled geometric windows with corner seal failure. Non-rectangular shapes concentrate stress at the sharp corners. On Therma-Tru shaped units the corner gaskets are the first thing to go, and the symptom is a cold draft at one corner only, easy to mistake for a weatherstrip problem. We probe the corner seal directly and re-set the gasket – chasing weatherstrip instead wastes a service call.
- Oversize picture windows with failed insulated glass units. A large Therma-Tru fixed unit carries a heavy IGU, and under Summerlin’s summer heat the seal between panes can fail early. Once the desiccant is saturated the haze is permanent and no cleaning fixes it. We measure the IGU to the original spec, including the low-E coating position and U-factor, so the replacement matches the unit you bought.
- Custom units with discontinued or hard-to-source hardware and profiles. Geometric units often carry hinge, handle, and profile hardware that Therma-Tru has since revised. When a part is discontinued we tell you straight, lay out the OEM option against a quality aftermarket equivalent and its price, and let you pick. We don’t quietly substitute a part that changes your warranty position.
Before
AfterOur Therma-Tru Custom & Geometric Windows Process
Every Therma-Tru job follows the same sequence, and the customer keeps the paperwork at each stage.
- 1
Measured survey. We template shaped openings and record frame readings in three planes, the sightline dimensions, and the existing product’s spec. You keep this document – the written quote is built from it and cannot differ from it.
- 2
Diagnosis and the parts decision. We identify the exact Therma-Tru series and the failed component, then lay out OEM against quality aftermarket where both exist. The trade-off, in plain dollars, is on the page before you decide.
- 3
Written price before any work starts. The scope, the parts, the price, and the timeline, in writing. Haven Clause 1 – Have it in writing – is the whole point, not a promotion.
- 4
Install or repair. Background-checked, uniformed technicians, license numbers on the record before arrival. Shaped and oversize units are set, shimmed, and sealed to the manufacturer’s spec, not to habit.
- 5
The test. We check operation, seal, and draft at every corner before we call it done, and photograph each stage.
- 6
Documented photo record and the guarantee. You get the photo record of the finished job and the 365-Day Done Right Promise – if it’s not done right, we make it right.
What Therma-Tru Custom & Geometric Windows Costs in Summerlin

Range, in dollars, for the Therma-Tru scenarios we see most in Summerlin. Exact pricing comes from the measured survey; these are the bands you can plan around.
| Scenario | Typical range |
|---|---|
| Re-glaze an arched or radius Therma-Tru unit (seal failure at the spring line) | $650 – $1,400 |
| Corner gasket re-set on a shaped geometric window | $280 – $600 |
| Replace a failed IGU in an oversize picture unit | $900 – $2,200 |
| New custom or geometric Therma-Tru window, templated and installed | $1,200 – $4,500 per opening |
| Frame correction for a bowed opening before slab reset | $400 – $1,100 |
What moves the number: the shape (a true radius costs more glass than a trapezoid), the size of the opening, whether the IGU includes a low-E coating, and how much of the frame has to be corrected before the unit goes back in. Call (844) 560-5201 for a free estimate built from your own survey.
Why Summerlin Homeowners Call Sightline Windows & Doors Summerlin for Therma-Tru Work
Because the price is written before a tool comes out of the box, and you get the evidence when the job is done. Our technicians have up to 14 years of experience across shaped and oversize units, and they know the Therma-Tru series that show up in Summerlin homes – which corner fails first, which seal goes early, which parts are worth OEM money. Calls are answered by a live person around the clock. And we’re not locked to one brand: PGT, CGI, CWS, and ES Windows are also on our verified list, so if a repair stops making sense and a different line fits the opening better, we’ll tell you rather than force the sale. Free second opinion on any written estimate from a competitor – bring it in and we’ll review it at no charge.
FAQs

Will repairing my Therma-Tru custom window void the manufacturer warranty? Not if the work is done correctly and with the right parts. We identify the exact series, use OEM where the warranty requires it, and flag any aftermarket substitution before you agree to it, so you know exactly where you stand.
Can you get parts for a discontinued Therma-Tru geometric unit? Often, yes – either through the OEM or a quality aftermarket equivalent we can match to your spec. When a part is genuinely unavailable, we tell you upfront and lay out the alternatives with prices, rather than substituting quietly.
Should I repair or replace my Therma-Tru shaped window? Repair usually wins when the frame and glass are structurally sound and the failure is a seal, gasket, or a single IGU. Replacement makes more sense when the frame is bowed or the unit is past the point where another repair pays for itself. The measured survey settles it.
How fast can you get to a Therma-Tru custom window in Summerlin? A repair on an existing unit is typically one visit; new custom and geometric units are templated within about a week and installed a few weeks later once the glass arrives. Call (844) 560-5201 for an exact timeline on your opening.
Do you work on Therma-Tru custom windows you didn’t install? Yes. We service existing Therma-Tru units throughout Summerlin, measure them fresh, and put the written scope in front of you before any work starts.
Whether you have a shaped transom losing its seal, an oversize picture unit with haze between the panes, or a new arched assembly to fit, the next step is a measured survey and a written price. Call Sightline Windows & Doors Summerlin at (844) 560-5201 to schedule your free estimate.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
