A Sightline company - serving Summerlin, NV

Window Replacement Troubleshooting: Common Problems and How to Fix Them

Last updated November 17, 2026

New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.

1

Choose your installer

The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.

Talk to a real person →

2

Select the right products

Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.

Compare the lines →

3

Prepare your home for install

Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.

Get the install checklist →

Compare the Lines We Quote

Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.

PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
  • More impact certifications than any other line we quote
  • WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
  • 99% on-time delivery keeps your install date on the calendar
See it quoted on your openings →
CGIThe heavyweight impact line$$$$$
  • Large-missile impact ratings for the strictest wind zones
  • Architectural-grade aluminum with commercial-depth frames
  • The line we quote when protection is the whole point
See it quoted on your openings →
CWSThe value pick$$
  • Vinyl systems built to strict wind codes
  • Strong energy packages at the friendliest price point
  • The smart start for whole-home replacements on a budget
See it quoted on your openings →
ESWSlim lines, big glass$$$$
  • Narrow-sightline aluminum for modern elevations
  • Oversized openings and floor-to-ceiling glass
  • Impact-rated without the bunker look
See it quoted on your openings →
ECOThe aluminum impact workhorse$$$
  • Factory-built aluminum impact systems
  • A strong price-to-protection ratio for coastal homes
  • Proven lines with short lead times
See it quoted on your openings →

Window Replacement Troubleshooting: Common Problems and How to Fix Them

Fogging between window panes is not a maintenance failure. It is a seal failure, and it voids the insulating glass unit’s thermal performance from the first day it appears. The question is whether it’s covered under the glass warranty or the installation warranty – and those are two different documents. Most post-replacement problems homeowners in Summerlin bring to us – fogging, sticking sashes, drafts, condensation – trace to a single root cause, but they’re usually handed generic maintenance advice instead of a diagnosis. This guide maps each symptom to its most probable installation or product defect, so you can walk into a conversation with your contractor holding specific facts rather than a vague complaint.

Call (844) 560-5201

Quick Answer

professional window installation service
Quick Answer

Most window replacement problems fall into three buckets: seal failures (fogging between panes), installation defects (drafts, water intrusion, sticking sashes from frame racking), and normal environmental condensation (interior or exterior moisture that isn’t a defect at all). Diagnosing which bucket you’re in determines who’s responsible – the glass manufacturer, the installer, or no one – and that distinction is the whole game.

BeforeBefore
AfterAfter

Table of Contents

The Symptom-to-Cause Matrix

Modern residential luxury home with large glass architectural windows
The Symptom-to-Cause Matrix

Before you call anyone, match your symptom to its likely source. In our experience across Summerlin homes built between 2015 and 2025, this matrix resolves about 80% of the initial diagnosis.

  • Fogging or haze between panes: Insulating glass unit (IGU) seal failure. Responsible party: glass manufacturer warranty. Not a maintenance issue.
  • Interior condensation on the glass surface: Interior humidity too high for the outdoor temperature. Responsible party: none – this is a ventilation or humidity issue in the home.
  • Exterior condensation on the glass surface: Normal in Summerlin’s dry desert nights when cold glass meets warmer exterior air. Not a defect.
  • Drafts along the frame edges: Air infiltration from incomplete shimming, missing weatherstripping, or frame-to-opening gaps. Responsible party: installer.
  • Sash that won’t slide or close flush: Frame racking (out-of-square installation), hardware wear, or paint/finish buildup in the track. Diagnosis determines responsibility.
  • Water staining at the interior sill or casing: Flashing failure, sill pan failure, or a casing gap that channels water inward. Responsible party: installer in most cases.

Notice the pattern: almost every symptom has a different responsible party. That’s why a written scope matters. If you know what window replacement in Summerlin documented at install, you know what you’re comparing against.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

Condensation: Three Locations, Three Causes

The single most common misdiagnosis we see is homeowners treating all condensation as a window defect. It isn’t. Where the moisture sits tells you everything.

Interior surface condensation means your indoor relative humidity is above roughly 50% for the outdoor temperature. In Summerlin homes sealed tight with modern HVAC, running a humidifier through winter, this happens routinely. The fix is ventilation or a humidity reduction, not a window replacement.

Between-pane fogging is the one that matters. An IGU is a sealed assembly filled with argon or krypton and a desiccant spacer. When the perimeter seal fails, moisture enters the gap and the desiccant saturates. Once that happens, the unit’s U-factor and SHGC performance are gone – the numbers on the label no longer describe the glass in your wall. Our technicians have up to 14 years of experience reading these failures, and the diagnosis is always the same: the unit needs replacement, and it’s a glass warranty issue, not an installation issue. Brands like PGT and ViewLux carry specific IGU seal warranties – read the terms before you call.

Exterior surface condensation in Summerlin is normal in the cool desert mornings. Cold gas inside the glass meets warmer exterior air and moisture beads on the outside. Wipe it and move on.

One note on documentation: photograph the fogging with a straight-on shot and a low-angle shot in daylight. The written record is half the claim.

Diagnosing Drafts Without a Smoke Pencil

Modern luxury living room with expansive floor-to-ceiling window installation.
Diagnosing Drafts Without a Smoke Pencil

You don’t need a smoke pencil to find where air is entering your home. You need a cold morning and one hand.

  1. Wait for an outdoor temperature at least 20°F cooler than indoors – a Summerlin winter morning works.
  2. Close all exterior doors and turn off exhaust fans to establish a baseline.
  3. Hold the back of your hand one inch from each frame edge, weatherstrip, and sash lock. Air moving across the skin is detectable by feel long before a draft is felt on the face.
  4. Mark each infiltration point with painter’s tape so you can reference it in the conversation.
  5. Note whether the draft comes through the frame-to-wall joint (installation), the sash gap (weatherstrip or lock), or the glass edge (seal).

An acceptable air infiltration rate for a quality residential window is 0.3 cubic feet per minute per linear foot of sash crack, per the standard NFRC test method. The number gets cited at a given pressure differential – that’s the honest way to read it. If your window is whistling, the infiltration is well above spec, and the installation is the likely source.

We’ve seen this most often in Summerlin frames installed over openings that weren’t checked for square before set. The glass is fine. The hole was wrong. If the frame is racked, window installation in Summerlin that starts with a measured survey catches it before set, not after.

Sticking Sashes: Hardware, Frame, or Finish?

A sash that won’t slide cleanly has one of three problems, and they don’t cost the same to fix.

Hardware wear is the cheap outcome. A roller, pivot bar, or sash lock can wear down; replacements often cost $12 – $40 per piece for quality hardware. You can inspect the roller or pivot yourself with a flashlight.

Frame racking is the expensive one. If the window opening was out of square during installation, the frame is twisted and the sash travels at an angle. You’ll see uneven reveal gaps – a wider gap on one corner than the opposite – and the sash will bind in the same spot every time. This is a callback. A contractor who installed it correctly should address it under the installation warranty. One installed wrong needs to be re-set.

Paint or finish buildup in the track is a $12 fix. On a wood or finished interior sash (rare in Summerlin’s stucco market but still present in some custom homes), dried finish in the jamb track binds the sash. Scrape, clean, and lubricate with a dry silicone stick.

Quick test: open the sash halfway. Gently push the sash upward at one corner. If it moves freely but binds on return, you have a hardware issue. If it binds in the same direction every time and the reveal gap is uneven, you have racking. Take a photo of the reveal gaps with a ruler in frame.

Mapping Water Intrusion: Flashing, Sill Pan, or Casing Gap

Modern matte black entry door with side glass panel installation
Mapping Water Intrusion: Flashing, Sill Pan, or Casing Gap

Water intrusion is the symptom most likely to be misdiagnosed by homeowners, and the one most likely to cause hidden damage before it’s visible inside. Three sources, and you can tell them apart by where the staining starts.

  • Flashing failure: Water stains appear at the top of the interior frame or upper corners. The head flashing or the WRB (weather-resistive barrier) lap at the top of the opening is the culprit. Common in stucco-finished Summerlin homes where the flashing detail was skipped or inverted.
  • Sill pan failure: Water stains or softness at the interior sill, or efflorescence on the exterior stucco below the opening. The sill pan is either missing, backsloped, or has a blocked weep path. Investigate with a hose test (10 minutes of steady spray at the exterior sill, observed from inside).
  • Casing gap: Staining on a vertical line beside the window, or a visible gap between the casing and the stucco. Water runs down the exterior wall and enters at the casing joint. Seal failure, not a flashing failure.

Documentation steps before you call anyone: photograph the exterior opening from three angles, photograph the interior staining with a tape measure in frame, and note the timing – does the leak appear during every rain, or only wind-driven rain from one direction? That last detail points directly at the source. For homeowners who want a documented second look, Sightline Windows & Doors Summerlin home reviews the evidence against the original scope.

What a Proper Troubleshooting Visit Should Produce

A troubleshooting visit is not a favor. It should produce a record. If a technician leaves without paperwork, the visit never happened.

  1. A written diagnosis: What was found, where, and what caused it – with photos.
  2. A photo record of the affected component: Frame, glass, hardware, or seal – one photo per defect, documented before any repair.
  3. A written determination of responsibility: Glass warranty, installation warranty, or homeowner maintenance.
  4. If covered, a written scope and scheduled date for the fix: Not a verbal “we’ll get someone out.”
  5. If not covered, a written price for the repair: Before any work begins.

This is exactly what our Haven Standard calls Evidence on Every Job. Every visit we complete ends with a documented photo record the homeowner keeps, and every job is covered by the 365-Day Done Right Promise – if it’s not done right, we make it right. Call (844) 560-5201 to schedule a free estimate. We answer live, 24/7.

When Your Contractor Says “Normal Settling”

professional door installation service
When Your Contractor Says “Normal Settling”

“Normal settling” is a real phenomenon and a real cover story, and the difference is measurable. Here’s how to tell which one you’re being handed.

Settling that causes a sticking sash or a draft in a Summerlin home typically moves the frame no more than 1/8 inch out of square over the first year. That won’t bind a correctly shimmed sash. If your window is binding harder 18 months after installation than it did at 30 days, the frame was never square – or the shims weren’t set correctly. That’s not settling. That’s installation.

Ask three questions in writing:

  • What was the measured out-of-square at installation, and what is it now?
  • Was a sill pan installed, and is it backsloped or level?
  • Was the head flashing detailed with a WRB lap, and can you show me a photo from the install?

A contractor who documented the install answers these from the record. A contractor who didn’t will answer from memory. If you don’t get written answers, escalate in writing – email, not phone – and reference your original contract and the applicable warranty clause. Keep every message.

If you want a second opinion on any written estimate or diagnosis from another outfit, we review it free. A properly documented door installation in Summerlin or window job should survive that review without a factual gap.

Common Mistakes to Avoid

  • Treating interior condensation as a window defect. It’s almost always a home humidity or ventilation problem, and calling a contractor for it wastes a visit and a diagnostic fee. Check your indoor humidity first.
  • Caulking over a suspected flashing failure. Caulk hides the symptom and traps moisture behind the wall, which is worse than the leak you started with. If water is entering at a flashing joint, the repair is the flashing, not the caulk line.
  • Replacing a fogged IGU out of pocket without checking the glass warranty. Most quality manufacturers – PGT and ViewLux among them – cover IGU seal failure for a specific term. Read the warranty document before you spend a dollar.
  • Accepting a verbal diagnosis without a written scope. In Summerlin, we’ve seen disputes that turn entirely on whether the contractor documented the diagnosis in writing. If it isn’t written, it isn’t evidence.
  • Patching sticking sashes with oil or grease. Dry silicone is the right lubricant for modern sash tracks. Oil attracts dust and gum deposits, and grease fouls the rollers. The cheap fix becomes the expensive fix.
  • Ignoring the reveal gap. A sash that sticks in the same spot every time with an uneven reveal is a frame problem, not a hardware problem. Check the reveal before you replace the hardware.
  • Skipping the hose test. Water intrusion that appears during every rain should be reproduced deliberately, not waited for. Ten minutes of steady spray at the sill tells you more than a season of observation.

When to Call a Professional

Modern pivot front door installation on a contemporary luxury home.
When to Call a Professional

Call us if any of these apply: you have between-pane fogging on one or more units, a sash that binds in the same spot despite clean tracks, a draft you can feel on a cold morning, water intrusion at the interior sill or casing, or a contractor who has answered your warranty question with “that’s normal settling.” Don’t call for interior surface condensation on cold mornings – that’s a home humidity issue you can handle with a hygrometer and better ventilation. And never attempt to remove or re-set a glass unit yourself; IGUs are heavy, sealed, and dangerous, and a re-installed seal that fails voids the warranty. Sightline Windows & Doors Summerlin offers free estimates in Summerlin. Call (844) 560-5201 and we’ll look at the evidence with you.

Frequently Asked Questions

The Bottom Line

Before and after window replacement showing updated frame and glass installation
The Bottom Line

Every post-replacement window problem has a root cause, and the cause tells you who pays for the fix. Fogging between panes is a glass warranty issue. Drafts, sticking sashes from racking, and water intrusion through the flashing or sill pan are installation issues. Condensation on the interior surface is usually a home humidity problem. The difference between a quick fix and an expensive callback is whether the original job was documented – with a measured survey you keep, a written price before work starts, and a photo record at completion. That’s the whole Haven Standard, and it’s why we can answer warranty questions in writing instead of from memory. If you want the evidence looked at, start with our Summerlin window replacement team and call (844) 560-5201 for a free estimate, or review your options on our Summerlin door installation page if the problem extends to your door openings.

Written by the team at Sightline Windows & Doors Summerlin.

Why Impact

Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin

Storm Protection

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.

Energy Savings

Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.

Noise Reduction

Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.

Burglar Resistant

Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.

Year-Round Comfort

Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.

Property Value

A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.

Other Services

Other Sightline Windows & Doors Summerlin Services

Modern dark window frame and metal sill replacement on stucco wall
Other Sightline Windows & Doors Summerlin Services
Reviews

What Neighbors Say About Sightline Windows & Doors Summerlin

★★★★

"Good crew, tidy install, finished a day early. Paperwork had the license number on it."

BBarry L.
★★★★★

"The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."

AAnnette R.
★★★★★

"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."

RRosalind C.
★★★★★

"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."

KKofi B.
★★★★★

"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."

SSimone T.
Need Windows & Doors help in Summerlin? Licensed & insured · free written estimates
Call (844) 560-5201
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Sightline Windows & Doors Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch