New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Custom & Geometric Windows in Summerlin: What to Know First
Sightline Windows & Doors Summerlin provides independent CGI custom and geometric window work across Summerlin – arched, curved, eyebrow, radius and oversized openings – with most standard projects quoted in a single measured visit and installed on a scheduled date you agree to in writing. A typical geometric replacement on a single opening runs $1,450 to $4,800 installed, and an oversized multi-panel unit can reach $9,500 or more depending on glazing and frame. We’re an independent CGI service provider, not affiliated with or authorized by CGI.
This page is for Summerlin homeowners who already have a CGI product in the wall – often in The Ridges, Red Rock Country Club, or a Summerlin West build from the 2015-2025 stretch – and want to repair, match, or replace a shaped or oversized unit without guesswork. Every job starts with a measured survey you keep and a written price before anyone lifts a tool. Call (844) 560-5201.
Key Takeaways
- Geometric and oversized CGI replacements in Summerlin typically run $1,450-$9,500+ installed, priced in writing first.
- Arches and curves fail differently than rectangles: radius frames and sealed units flex, and Summerlin’s thermal swings accelerate it.
- We’re an independent CGI service provider – we specify by what the opening requires, not by what’s in stock.
- 365-Day Done Right Promise and a documented photo record on every CGI job.
How CGI Products Fail – and How We Fix Them

Shaped and oversized CGI units don’t fail the way standard rectangles do. The geometry itself is the variable, and in Summerlin’s climate the failure modes cluster around thermal movement and sun exposure on west- and south-facing elevations. Here’s what we actually find, and what we do about it.
- Radius and arched frame joint separation (CGI Series 2000 and Series 300 architectural shapes): The mitered joints on a curved frame carry more stress than a 90-degree corner because the arc concentrates load at the spring points. Under Summerlin’s daily temperature swing – often 30 degrees or more between a cool desert morning and an afternoon high – the joint flexes, sealant cracks, and you get a hairline gap at the crown. We reset and re-seal the joint, verify the frame is still true to the arc, and re-glaze only if the seal failure has reached the glass.
- Sealed unit fogging in curved and eyebrow units: A shaped insulating glass unit has a bent or cut-to-radius edge, and that edge seal is the weak point. When the perimeter seal fails, moisture enters and the unit fogs from the curve inward – not the even bottom-up fog you see on a flat window. This is a unit replacement, not a repair; the frame usually stays.
- Oversized opening sash sag and hardware wear (CGI Estate and larger fixed-plus-operable configurations): A tall operable panel in an oversized opening is heavy, and the hinges and balances wear faster than on a standard slider. You’ll notice the sash dragging or not latching flush. We replace the hardware with the correct load-rated part rather than a lighter aftermarket substitute.
- Water intrusion at shaped head and sill transitions: A curved head flashing is harder to integrate than a straight one, and Summerlin’s monsoon-season bursts find the gap. We inspect the flashing-to-frame transition, re-set the weather barrier, and re-flash the head correctly – the most common cause of a “leak” that isn’t the glass at all.
- Frame distortion from direct west-facing sun: Vinyl and composite frames on a full-sun Summerlin elevation expand and contract more than on a shaded one, and over years a shaped frame can lose its true arc or a sash can stop sealing. We measure the frame for square and arc consistency before recommending anything, because replacing glass on a distorted frame just moves the problem.
Before
AfterOur CGI Custom & Geometric Windows Process
Every CGI job follows the same sequence, and the documentation is the point as much as the install.
- 1
Measured survey: We measure the opening, the arc or radius, sightline dimensions, and existing glazing specs, and you keep that survey. This is the document the quote is built from – they can’t differ.
- 2
Diagnosis and parts decision: We identify the exact CGI series and the actual failure – frame, seal, hardware, or flashing. Then we decide OEM versus a quality aftermarket part where the OEM is discontinued or slow, and we tell you which we’re using and why.
- 3
Written price before any work: You get a line-item written price before a tool is lifted. No change orders, no surprises once work starts.
- 4
The repair or install: Background-checked, uniformed technicians, license numbers on the record before arrival. Custom and geometric units are set, shimmed, and sealed to the arc or the opening’s true dimensions.
- 5
The test: We check operation, latch, seal, and water-shed at the head and sill, and confirm the unit is true.
- 6
Cleanup and photo record: We clean the site and leave a documented photo record of the work, backed by the 365-Day Done Right Promise.
What CGI Custom & Geometric Windows Costs in Summerlin

These are real installed ranges for common CGI shaped and oversized scenarios in Summerlin. Your exact price depends on the opening, the glazing, and the frame, and you’ll have it in writing before work starts.
| Scenario | Typical installed range |
|---|---|
| Single arched or radius window replacement | $1,450 – $3,200 |
| Eyebrow or half-round unit, standard size | $1,200 – $2,600 |
| Curved sealed-unit (glass) replacement only | $650 – $1,800 |
| Oversized opening, single large unit | $3,800 – $7,500 |
| Oversized multi-panel / operable configuration | $6,500 – $9,500+ |
| Hardware and balance replacement | $180 – $450 |
What moves the price: the radius or arc complexity, impact-rated versus standard glazing, low-E coatings and U-factor/SHGC specs, whether the frame stays or comes out, and access to a second-story or hard-to-reach Summerlin elevation. Estimates are free, and we’ll review any competitor’s written quote at no charge as a second opinion. Call (844) 560-5201.
Why Summerlin Homeowners Call Sightline Windows & Doors Summerlin for CGI Work
Custom and geometric work rewards a shop that measures first and documents everything. That’s the whole operating model here: a measured survey you keep, a written price before work starts, and a photo record when it’s done – all under the Haven Standard. If something’s not right within 365 days, we make it right; that’s written into the standard, not offered as a courtesy.
Our technicians have up to 14 years of experience, and they know how a CGI arc behaves on a Summerlin elevation. Calls are answered by a live person, and when a job calls for a different line, we also work with PGT, CWS, ES Windows, and ECO Window Systems – specified by what the opening requires, not by what’s in stock. Call (844) 560-5201 for a free estimate.
FAQs

It can, if the wrong part or method is used. We’re an independent CGI service provider, and we follow warranty-safe practices – matching OEM parts or approved equivalents and documenting the work – so your existing coverage isn’t needlessly compromised. Call (844) 560-5201 to talk through your specific unit.
Usually yes. Some older CGI series parts are discontinued or slow to source, so we evaluate OEM versus a quality aftermarket part and tell you which we’re using and why before ordering. Estimates are free.
It depends on what failed. A fogged curved unit or worn hardware is a repair; a distorted frame or a seal failure that’s reached the frame is usually a replacement. Our measured survey tells us which, in writing. Call (844) 560-5201.
Timing depends on the unit – custom and oversized orders take longer than a hardware fix, and we tell you the date in writing rather than promising speed. The measured survey and written price come first.
Yes. Oversized and multi-panel CGI openings are a regular part of the work, including operable configurations where sash sag and hardware wear are the usual issues. Call (844) 560-5201 for a free estimate.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
