New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Door Installation: The Summerlin Owner’s Guide
Door installation for CGI units in Summerlin typically lands between $1,150 and $4,800 per opening installed, depending on whether you’re replacing a sliding patio door, an entry door, or an impact-rated garage door, and most planned swaps are scheduled within one to two weeks of the measured survey. A failing installation announces itself slowly: a door that drags at the strike jamb in July, a bottom seal that lets in sand after a wind event, or fogged glazing on the glass unit. Those are the three calls we field most from Summerlin homeowners.
Which CGI Models This Applies To

CGI makes a wide spread of product here, and the part numbers are not interchangeable. The residential lines most Summerlin owners are dealing with are the CGI sliding patio doors (Series 2000 and above, two- and three-panel configurations), the CGI entry door systems, and CGI impact-rated garage doors – the last of which is a distinct category from a standard steel door and uses different hinge and roller hardware. The first place to look is the silver label inside the track, on the head jamb, or on the door panel edge; that label carries the series, the panel width, and the glass code. If the label is gone, a measured survey gives us the rough opening, the panel width and height, the glazing thickness, and the sightline – the visible frame width from the glass edge to the outer frame edge – and those four numbers tell us which CGI product you have.
Then comes the OEM-versus-aftermarket decision. For CGI glass units and hardware, the OEM part is the surest fit – same extrusion, same glazing channel, same weep system – and it carries CGI’s warranty. Quality aftermarket equivalents exist for rollers, weatherstripping, and seals, and they often cost 20 to 40 percent less, but the fit tolerance matters: a roller that is two millimeters off changes how the panel tracks. We specify OEM where the fit is structural and aftermarket where it is not, and we put that reasoning in the written scope. Sightline Windows & Doors Summerlin is an independent installer, not affiliated with CGI, and we say so on the quote.
Before
AfterSigns Your CGI Door Installation Is Failing
- Dragging or hard closing in summer heat. The panel is swelling or the frame has shifted out of plumb against the rough opening – common after a Summerlin summer because the temperature swing from a 110-degree afternoon to a 70-degree night moves the frame more than the hardware is set up for.
- Fogged or cloudy glass. The sealed glass unit’s edge seal has failed and moisture is inside the cavity. No cleaner fixes this; the unit gets replaced, not repaired.
- Water pooling on the threshold or staining the interior floor. Either the weep system is clogged, the threshold is set too high for the slab, or the installer skipped the sill pan. That last one is an installation failure, not a CGI product failure.
- Air leaking around the perimeter or between panels. The weatherstripping or the perimeter sealant has broken down, which shows up fast on a windy day in Summerlin and reads as dust and sand blown across the floor.
- Hinge screws that keep backing out, or a track that’s scored. The hinge has loosened from the jamb because the original screws lacked bite, or the roller has worn flat and is dragging metal on metal.
Replacement Cost & What’s Included

| Scope | Installed Price Range |
|---|---|
| Sliding patio door, standard glazing, size-matched replacement | $1,150 – $2,600 |
| Entry door system, single, no sidelights | $1,400 – $3,200 |
| Impact-rated garage door, CGI unit | $2,200 – $4,800 |
| Hardware and seal refit only (rollers, hinges, weatherstripping) | $180 – $450 |
The range moves on size, glazing type (impact-rated or standard, Low-E or clear), hardware grade, and whether the rough opening needs any correction – a frame out of square adds trim and shim work. Every quote is line-itemed: part, labor, disposal of the old unit, sealant and trim. No change orders mid-job. Every install is covered by the 365-Day Done Right Promise under the Haven Standard, and every visit ends with a documented photo record.
DIY or Call Us?
Some of this an owner can check without risk. Run a straightedge along the frame to see if it’s plumb. Look for the CGI label. Clear debris from the weep holes on a slider with a stiff brush. Those are safe, and they give us useful information on the call.
Where DIY goes wrong is at the hinge-and-panel stage on an impact-rated garage door or a large sliding patio door. These panels are heavy, they’re tensioned, and they can injure a person if they come off the track – an impact-rated garage door panel carries a counterbalance spring under load, and that is not a component anyone should adjust without the right tools and training. A door that drops can also take a finger with it. If you’re at that stage, call (844) 560-5201 and we’ll schedule the survey.
FAQs

How long does a CGI door last in Summerlin? Plan on 20 to 25 years for the door and frame, 12 to 15 years for the sealed glass unit, and 5 to 8 years for the rollers and weatherstripping in a Summerlin climate – the UV load and the daily temperature swing are what wear the soft parts first. Call (844) 560-5201 for an exact read on your unit.
Can a failing CGI door be repaired instead of replaced? Often, yes. If the frame is plumb and the panel is sound, a hardware refit (rollers, hinges, seals) restores a door that drags or leaks air. If the glass is fogged or the frame is out of square, replacement is the honest answer. The measured survey tells you which, and we put it in writing.
How long does the swap take? A sliding patio door or entry door is a one-day install. An impact garage door is typically one day for the door and a second visit for the opener and final adjustment. The survey and the written price come first, then we schedule.
How do you source the CGI part? We specify against the label series or the measured survey dimensions, confirm the part number against the CGI product line, and lock it into the written scope before work starts. Nothing is guessed at, and nothing ships until you’ve signed off on the price. Call (844) 560-5201 to start the survey.
Why Summerlin Owners Call Sightline
We install CGI doors across Summerlin and neighboring areas – sliding patio doors, entry systems, and impact-rated garage doors – alongside PGT, CWS, and ES Windows. Every job starts with a measured survey you keep, and the written quote is that same document, so the number doesn’t move once the crew arrives. Technicians are background-checked, uniformed, and carry their license numbers on the page. Calls are answered by a live person, any hour.
Call (844) 560-5201 to schedule your free estimate. Bring a competitor’s written quote and we’ll review it at no charge as a free second opinion.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
What Neighbors Say About Sightline Windows & Doors Summerlin
