New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Impact Garage Doors: The Summerlin Owner’s Guide
We install and replace CGI impact-rated garage doors in Summerlin, and a full door replacement with impact glazing typically runs $2,400 to $4,800 installed, while a hardware or spring-related repair on an existing CGI door usually lands between $180 and $650. A failing CGI impact door announces itself in a few predictable ways: the door reverses halfway down, one panel’s laminate starts to craze or fog, the opener strains against a door that suddenly seems heavier, or a spring snaps with a sound like a gunshot from the garage. In Summerlin, where summer garage interiors regularly push past 110°F, those failures tend to show up earlier than the national average.
Key Takeaways
- CGI impact garage doors in Summerlin typically cost $2,400 – $4,800 installed, depending on size, glazing, and series.
- We’re an independent installer, not affiliated with CGI – we specify the correct OEM or equivalent part for your door.
- Springs and torsion hardware are genuinely dangerous to replace without training; we say so plainly below.
- You get a written price before any work starts and a documented photo record when it’s done.
Which CGI Models This Applies To

CGI manufactures its impact garage doors across several residential series, and the part that fits one series usually will not fit another. The identification starts on the door itself: most CGI impact doors carry a manufacturer label inside the jamb or on the bottom rail with the model and series number, and a safety label near the bottom bracket listing the door’s weight and spring cycle rating. Photograph both labels before you call anyone. The model number tells us the panel profile, the track radius, and the torsion or extension spring specification your door was built around.
Here’s the compatibility gotcha that trips up Summerlin homeowners: CGI impact doors come in both torsion-spring and extension-spring configurations, and the two take completely different hardware. A torsion door uses a single shaft across the header with wound springs; an extension door uses springs that run parallel to the horizontal tracks. Order the wrong spring type and it either won’t fit or won’t safely counterbalance the door’s weight, which on an impact door is heavier than a standard door because of the reinforced glazing and thicker panels. We confirm the spring type, wire gauge, and inside diameter before we order, using your door’s weight from the label rather than a guess based on size. We’re an independent service provider, not affiliated with CGI, so we’re free to match OEM parts or specified aftermarket equivalents, whichever your door and budget call for.
Before
AfterSigns Your CGI Impact Garage Doors Is Failing
Owners rarely watch a part fail in real time. They notice the symptom first and work backward. These are the five we see most in Summerlin:
- The door reverses before it reaches the floor. Usually a misaligned safety sensor or a door that’s become heavy from a weakening spring, which the opener reads as an obstruction.
- A visible gap or kink in the spring above the door. A stretched or snapped torsion spring no longer counterbalances the door’s weight, and the opener is left lifting the full load.
- One panel’s impact glazing fogs, crazes, or delaminates. The laminated glass in an impact door can separate at the edges after years of heat cycling, which means that panel’s protective rating is compromised.
- The door sags on one side or scrapes the track. Worn rollers, a bent track, or a hinge that’s pulled loose from the panel, often after a heat-driven expansion cycle.
- The opener grinds or strains on lift. A sign the door’s balance has drifted, so the motor works harder than it was designed to and wears faster.
Two of these are cosmetic annoyances. Two are a genuine safety concern. The spring is the one that can hurt someone, so read the next section before you touch it.
Replacement Cost & What’s Included

Impact garage door work in Summerlin splits into repair and replacement, and the price depends on what’s actually failed. Here’s the range we quote, in dollars, on the page:
| Scope | Typical Installed Range |
|---|---|
| Torsion spring replacement (pair) | $280 – $480 |
| Rollers and hinges, full set | $180 – $340 |
| Impact panel with laminated glazing | $420 – $900 |
| Opener replacement | $380 – $720 |
| Full impact door replacement | $2,400 – $4,800 |
What drives the range: door size (single vs. double bay), the spring cycle rating you choose, whether glazing or panel work is involved, and whether the tracks need realignment. Parts and labor are itemized separately in the written price, so you can see what the hardware costs against what the install costs. Every job carries the 365-Day Done Right Promise and leaves a documented photo record, and our technicians bring up to 14 years of experience to the work.
DIY or Call Us?
Here is where we’re direct. You can safely check a few things yourself: look at the door’s labels, watch whether it travels evenly, listen for grinding, and test that the safety sensors are clean and aligned. You can also pull the manual release and lift the door by hand to feel whether it’s balanced. What you should not attempt is the torsion spring or the extension springs, the cables, or anything on the header assembly. Those springs hold the door’s entire weight under tension, and a spring that lets go while you’re working on it causes serious injuries every year. This is not a scare tactic; it’s the reason trained installers handle this part. For anything past a visual check, call us at (844) 560-5201 and we’ll send a background-checked, uniformed technician with a license number on record before arrival.
Frequently Asked Questions

A standard torsion spring is rated for about 10,000 cycles, and a high-cycle spring for 20,000 to 25,000; in Summerlin’s heat, where garage interiors bake at triple-digit temperatures for months, expect the shorter end of that range and inspect annually. The heat accelerates metal fatigue and dries out lubricant faster than in cooler climates. Call (844) 560-5201 for an exact quote on a high-cycle upgrade.
Sometimes, yes. A single failed hinge or roller is a repair. A cracked or delaminated impact panel usually means replacement because the laminated glass can’t be resealed to its original rating once it’s failed. A spring is always replaced, never repaired, because a repaired spring can’t be trusted under load. We’ll tell you which one you’re looking at before any work starts.
A spring or hardware repair is usually a two-to-three-hour visit. A single impact panel swap is similar. A full door replacement is a longer scheduled job, not a same-day drop-in, and we’ll give you the timeframe in the written quote. None of this is emergency work, so we don’t rush it or promise a same-day install on a full replacement.
We match the model and series from your door’s labels, confirm the spring type, wire gauge, and inside diameter against the door’s actual weight, then specify OEM or a quality aftermarket equivalent with the specs written into your quote. You see exactly what’s being installed and why. Bring us another written estimate and we’ll review it at no charge as a free second opinion.
If your CGI impact garage door is straining, sagging, or its glazing has gone cloudy, call Sightline Windows & Doors Summerlin at (844) 560-5201 for a free estimate. We’ll name the price in writing before a tool is lifted, send a verified crew, and leave you a documented photo record of the work under the Haven Standard. Live phone coverage runs around the clock, so you’ll reach a person, not a voicemail queue.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
