New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Sliding & Patio Doors: The Summerlin Owner’s Guide
If your CGI sliding or patio door is sticking, fogging, or letting Las Vegas Valley heat through the glass, we install CGI-spec replacement sliding and patio doors in Summerlin. Installed pricing for a CGI-compatible sliding unit generally lands between $2,400 and $6,800 depending on size, glazing package, and impact rating, and most full replacements are complete in one working day. Homeowners here usually discover the problem the same way: the door starts dragging in its track around late June, or the inside pane reads hot to the touch while the AC runs flat out. By August, the roller noise is louder than the air handler.
Which CGI Models This Applies To

CGI makes several sliding door families, and the part you need depends on which one you have. The most common in Summerlin homes built between 2015 and 2025 are the CGI Sentinel and CGI Estate series impact-rated sliders, but we also see the older CGI non-impact sliding units in the established pockets of The Ridges and Red Rock Country Club. The surest way to identify your unit is the etched label on the glass corner or the metal plate on the interior jamb: it lists the series, the tempered or laminated designation, and the test standard the door passed. Measure the rough opening and the glass size from that label. Don’t guess by width alone, because CGI slid doors of the same nominal size can sit in different head and sill tracks depending on the production year.
On the OEM-versus-aftermarket call for CGI specifically: the OEM roller assembly from CGI is usually the better match if the door is under 15 years old and the track is still true. Aftermarket rollers that claim CGI compatibility often have a slightly different wheel diameter, which changes how the door sits in the channel and accelerates wear on the bottom frame. Sightline Windows & Doors Summerlin is an independent service provider, not affiliated with CGI. We source what the opening actually requires, not what we happen to have in stock.
Before
AfterSigns Your CGI Sliding & Patio Doors Is Failing
Sliding doors fail gradually in Las Vegas, and the early signals are easy to talk yourself out of. Here are the five we see most in Summerlin:
- The panel drags or jumps in the track. Worn or flattened rollers lose their round profile, so the door rides on the frame instead of the wheel. This is the first symptom in almost every case, and it gets worse faster once the roller is out of round.
- Water or dust getting past the sill. Sill track debris and hardened weather-stripping allow wind-driven dust and monsoon rain to intrude. In Summerlin we regularly see spring dust storms load the track with grit that gets ground into the rollers all summer.
- Fogging or condensation between the glass panes. A broken seal in the insulated unit lets moisture in. Once the desiccant is saturated, the haze never clears, and the glass has to be replaced, not cleaned.
- Heat radiating off the glass even with the AC running. Degraded low-E coating or a failed argon fill drives U-factor up. That’s the summer electric bill climbing without a change in your habits.
- The door won’t lock or the handle feels loose. A misaligned panel puts stress on the latch and strike plate. Left alone, the latch wears out along with the track geometry.
Replacement Cost & What’s Included

Installed pricing for CGI sliding and patio doors in Summerlin runs from about $2,400 for a standard two-panel non-impact slider to $6,800 or more for a large impact-rated multi-panel unit with a premium glazing package. Here’s what drives the range:
| Line item | Typical installed range |
|---|---|
| Two-panel sliding door, non-impact, standard glazing | $2,400 – $3,900 |
| Two-panel impact-rated slider | $3,800 – $5,600 |
| Three-panel or large multi-slide unit | $5,200 – $6,800+ |
| Low-E / high-performance glazing upgrade | $180 – $520 |
Every quote is written before any work starts, per Haven Clause 1, and the measured survey you keep is the same document the invoice is built from. Labor, haul-away, and permit where required are included in the figure; there are no surprise line items added after the truck pulls up. Your job is covered by the 365-Day Done Right Promise, and every visit leaves a documented photo record.
DIY or Call Us?
There are a few things you can check safely. Wipe out the sill track with a brush and vacuum, feel for a flattened roller by lifting the panel, and confirm the weather-stripping is still pliable. Those are inspection steps, not repairs.
Where DIY goes wrong on a CGI slider is the panel removal itself. A full glass panel weighs 80 to 160 pounds, and the moment it leaves the track it’s a two-person job with a real risk of the glass dropping or the frame bending if it’s set down unevenly. Bending the track even a few degrees means the new rollers won’t run true. We’ve seen Summerlin homeowners crack a tempered panel trying to lift it alone. That’s a $400 to $900 mistake on top of the original repair.
If the roller or track has failed, call (844) 560-5201. We’ll tell you honestly whether it’s a repairable part or a full door.
FAQs

Ten to fifteen years is a realistic expectation for the rollers and seals in this climate. The UV load and summer dust in Summerlin take a toll faster than in milder markets. The glass unit itself often lasts longer than the hardware that moves it.
Often, yes. If the frame is square and the glass is intact, new rollers, weather-stripping, and a track cleanout can restore smooth operation for a fraction of replacement cost. If the insulated glass has fogged or the frame is bent, replacement is usually the better money.
A standard roller and hardware refresh is typically a few hours. A full door replacement is usually a single working day once the unit is on site, weather permitting. We confirm timing in the written scope before we start.
We identify your exact series from the label and measure the opening, then order what that unit requires. We don’t stock parts and we don’t carry parts on a truck. The right part is ordered against your measured survey, not pulled off a shelf that may not fit.
Get Your CGI Sliding Door Priced in Writing
If your CGI slider is dragging, fogged, or letting heat through in Summerlin, call (844) 560-5201 to schedule your free estimate. You’ll get a written price before any work starts, background-checked technicians with license numbers on the page, and a documented photo record when the job is done. Bring a competitor’s quote if you have one; our free second opinion on any written estimate costs you nothing.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
What Neighbors Say About Sightline Windows & Doors Summerlin
