New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Windows & Doors in Paradise, NV
We provide independent CGI service throughout Paradise, NV, and the one thing that shapes our CGI work here is this: Paradise is a fully built-out community of 1960s to 1990s housing, so nearly every CGI opening we touch is a retrofit, not a new build. That means replacing failed single-pane aluminum sliders and sealed units that have cooked in desert sun for decades, not setting fresh frames in fresh walls. Our technicians have up to 14 years of experience with CGI windows and doors specifically. Call (844) 560-5201 to schedule a free written estimate on your Paradise opening.
To be clear about who we are: Sightline Windows & Doors Summerlin is an independent CGI service provider. We are not authorized, sponsored, or endorsed by CGI. Our knowledge of CGI products comes from hands-on work in the Las Vegas Valley’s climate, not from a manufacturer relationship.
Why Paradise Residents Choose Us for CGI Service

CGI windows and doors show up in a lot of Paradise homes, particularly the aluminum single-hung and horizontal roller units that were common in this valley from the 1970s through the 1990s. We know these product lines at the component level: how the Series 5000 single-hung balances wear, where the Series 300 sliding glass door rollers seize, and why the Series 2000 horizontal roller tracks bind after a few summers above 105°F.
That familiarity matters in Paradise because parts for older CGI units aren’t always catalog items. We source OEM CGI parts when they’re available for critical components like rollers, locks, and seals, and high-quality aftermarket equivalents when the original part is obsolete or priced out of reason. You get a straight answer about what’s in your window and what it will take to fix it.
We serve Paradise under the Haven Standard, which means a written price before any work starts, background-checked and uniformed technicians identified by license number before arrival, and live phone coverage 24/7. Our CGI service covers the full range of repair, replacement, and energy upgrades on these openings.
Before
AfterCommon CGI Windows & Doors Problems We Solve in Paradise
- Seal failure and fogging in dual-pane CGI windows. Intense UV and daily heat cycling break down the perimeter seal on insulated glass, and moisture finds its way between the panes. In Paradise this happens faster than the national average because the glass is under near-constant thermal load from April through October. You’ll see a milky haze or actual water droplets in the corner of the pane.
- Track warping and sticking in CGI aluminum sliding glass doors. Aluminum expands and contracts with summer highs that routinely clear 105°F, and the upper and lower tracks in older CGI sliders deform over time. The door drags, the rollers flat-spot, and the opening stops sealing tight, which lets hot air and dust push in.
- Weatherstripping and finish breakdown on CGI entry doors. Low humidity and relentless sun dry out the weatherstripping and degrade the finish, so a door that looked fine at year five drafts badly by year twelve. You’ll feel it on the back of your hand at the perimeter before you see it visually.
- Glass stress cracks in CGI fixed and picture windows. Thermal shock happens when exterior glass temperatures spike in direct sun and interior cooling hits the other face. Large fixed units with no venting are the most exposed, and Paradise’s east- and west-facing glass takes the hardest hit.
- Failed rollers and locks on CGI horizontal roller and slider units. The hardware is the first thing to go when a unit has run dry and gritty for years. A roller that’s seized will chew up a track, so catching it early is the difference between a hardware repair and a full slider replacement.
CGI Service in Paradise: What Local Conditions Mean for Your Equipment

Here’s the fact that drives most of our CGI work in Paradise: the housing stock is older, largely mid-century through the 1990s, and a large share of it still runs original single-pane aluminum sliders. Those units don’t typically fail by cracking a pane. They fail by losing their seal and fogging, or by the sliding tracks warping and sticking in the heat. That means a high share of jobs in this ZIP, 89105, are full slider-to-multipoint retrofits rather than simple glass swaps. You can’t just pop a new lite into a 1985 aluminum frame with a warped track and bad rollers and expect it to seal, lock, and glide the way a modern unit does. The retrofit has to correct the opening, not just the glass.
In a typical Paradise home with original CGI aluminum sliding doors, the homeowner notices the door sticking and fogging between panes as the seal fails from years of 105°F-plus heat and UV exposure. A qualified local pro often finds warped tracks and degraded rollers, and may recommend a full retrofit to a multipoint locking system with low-E glass rather than just replacing the glass. That approach holds up better to the desert cycle, and it’s why we favor replacement when several failures compound at once.
CGI Models & Products We Service in Paradise
We work on the CGI lines that actually appear in Paradise homes: the Series 5000 Aluminum Single-Hung, the Series 300 Vinyl Sliding Glass Door, the Series 2000 Aluminum Horizontal Roller, and the Series 800 Casement. Alongside straight repairs, we handle horizontal roller window service, replacement doors, and energy-efficient upgrades to low-E glazing with a lower SHGC (solar heat gain coefficient) to cut the solar load these units take.
Parts are sourced per job, not pulled from local stock. When we quote, we tell you whether the correct part is an OEM CGI item or a quality aftermarket equivalent, and why. If a component is obsolete, we say so and give you the honest repair-versus-replace comparison based on the unit’s age, condition, and energy goals.
CGI Service Pricing in Paradise

CGI service pricing in Paradise runs a wide range depending on whether you’re repairing hardware, replacing glass, or retrofitting a whole opening. A hardware repair like rollers or locks typically lands in the low hundreds. A sealed-unit or glass replacement runs higher. A full slider-to-multipoint retrofit with low-E glass is a bigger investment, and the cost tracks the size of the opening, the glass spec, and whether the frame needs correction. We name the price in dollars on the written quote, before any work starts, and the quote and the measured survey are the same document.
Every estimate includes a measured survey you keep, a written line-item scope, and the photo record from any follow-up visit. Call (844) 560-5201 for exact pricing on your CGI opening, and we’ll get a written estimate in your hands.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Paradise

Because the seal fails fast under intense UV and heat cycling. When the perimeter seal on dual-pane glass breaks down, moisture gets between the panes, and in Paradise’s climate that happens well ahead of the national average. Call (844) 560-5201 and we’ll tell you whether resealing or a full unit replacement makes sense.
Sometimes you can replace just the glass, but often you can’t, and the deciding factor is the frame and hardware. If the track is warped or the rollers are shot, a new lite won’t seal or glide correctly. We give you the honest repair-versus-replace call based on the unit’s condition.
Check for sticking, fogging between panes, and visible track deformation. If the seal is gone and the track is warped, a full retrofit usually outlasts a glass swap in this heat. Call (844) 560-5201 to schedule a free estimate and we’ll walk the door with you.
Yes, with the right spec. CGI aluminum and vinyl lines handle the heat when the glazing carries a low-E coating and appropriate SHGC for our sun exposure. The failure we see is usually aging original units, not the product category itself.
A written price before work starts, license numbers on the crew, and a documented photo record. Ask for the measured survey and the written scope in one document. Call (844) 560-5201 for a free second opinion on any written estimate you already have.
Service Areas Near Paradise
Along with Paradise, we serve homeowners in Summerlin, Spring Valley, Las Vegas, Enterprise, and nearby communities including Winchester and Whitney. If your CGI windows or doors need attention and you’re in this part of the valley, we can cover it. See our full Paradise service area for the neighborhoods we work.
Book Your CGI Service in Paradise Today

Have a CGI window or door in Paradise that’s fogged, sticking, or drafting? Call (844) 560-5201 to schedule your free written estimate. We’ll bring the measured survey, name the price in dollars before any work starts, and back every job with the 365-Day Done Right Promise. Same-day availability applies to qualifying repairs; planned retrofits are scheduled to fit your timeline.
Written by the team at Sightline Windows & Doors Summerlin.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
