New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CWS Energy-Efficient Windows in Summerlin: What to Know First
We provide independent CWS energy-efficient window service in Summerlin, including Low-E and argon-glass upgrades, ENERGY STAR replacement windows, and solar or tinted glass options. Most single-window jobs are completed in one visit after a measured survey; whole-home replacements are scheduled across one to two weeks depending on how many openings you have. We quote in writing before any work starts, so the price you see on paper is the price on the invoice.
This page is for Summerlin homeowners who already have CWS windows in place and want to cut cooling bills, stop UV fading, or replace failed glass units without guessing at cost. If that is you, call (844) 560-5201 and we’ll set up a free estimate.
How CWS Products Fail – and How We Fix Them

CWS makes a wide range of window products, and the failure modes we see in Summerlin depend heavily on which line was installed and when. Here is what our technicians actually find on CWS jobs around the valley, along with the cause and the fix.
- Seal failure and fogging in Low-E double-pane units. Desert temperature swings – sometimes 40 degrees between day and night in the same Summerlin week – flex the spacer and eventually break the hermetic seal. Moisture sneaks in, the desiccant saturates, and the glass clouds from the inside. The fix is a sealed-unit replacement, not a glass polish; the seal is the part that failed and polishing hides it temporarily without restoring the insulation value.
- Solar heat gain climbing in west-facing windows. Older CWS units with a high SHGC (solar heat gain coefficient) let in more radiant heat than they should. We measure the actual SHGC and U-factor on the existing units during the survey and specify a replacement with a rating that fits the orientation. A west-facing master bedroom and a north-facing kitchen should not get the same glass.
- Fading on furniture and flooring near south- and west-facing CWS windows. Ultraviolet light does the damage, and even a functioning Low-E coating can lose effectiveness once it starts to break down. Insulated laminated glass with a UV-blocking interlayer cuts UV transmission dramatically and is the spec we reach for when a customer has already watched a rug or a wood floor fade.
- Frame and sash gasket shrinkage. Vinyl weatherstripping and glazing gaskets dry out and pull back from the glass or frame. The window still closes, but air leaks around the perimeter and the energy rating is no longer real. We replace gaskets with the correct OEM profile where it’s available, and a documented quality aftermarket equivalent when the OEM part is discontinued – which happens more often on older CWS lines.
- Failed argon fill on early energy-efficient series. Argon gas escapes over time as seals age, and the U-factor creeps up without any visible symptom. A window that performed at installation may measure noticeably worse at year ten. Our techs verify with the sealed-unit replacement rather than guessing; if the glass is intact and the seal holds, we leave it and note it in the record.
Before
AfterOur CWS Energy-Efficient Windows Process
- 1
Measured survey first. We measure every opening, note the orientation (east, west, north, south), and record the existing CWS series and glass spec. You keep a copy of that survey, and every quote we write afterward has to match it.
- 2
Diagnostics and glass decision. We confirm whether each unit needs a sealed-unit replacement, a full window replacement, or just gasket work. The OEM-versus-aftermarket call is made per unit and written into the scope – we don’t swap a $40 gasket for a $900 window because it’s easier.
- 3
Written, itemized quote. Each line lists the opening, the glass spec (U-factor, SHGC, Low-E type, argon or laminated), and the price. No allowances, no change orders waiting to happen.
- 4
Installation or replacement. Our technicians are background-checked, uniformed, and identified by license number before arrival. For replacements we pull the required permits and the work is inspected per Summerlin’s applicable code.
- 5
Documented photo record. Every completed job gets a photo record – the new unit seated, the seal, the finished exterior trim. It’s standard on every visit and included in your file.
- 6
365-Day Done Right Promise. If it’s not done right, we make it right – written into the Haven Standard on every job, not offered as a courtesy.
What CWS Energy-Efficient Windows Costs in Summerlin

These are the ranges we see on CWS energy-efficient window work in Summerlin. Your actual price depends on the series, glass spec, and whether you’re replacing one unit or a whole elevation.
| Scenario | Typical Price |
|---|---|
| Sealed-unit replacement (Low-E, argon, single window) | $320 – $620 per unit |
| Full window replacement, ENERGY STAR rated, single opening | $850 – $1,700 per window |
| Insulated laminated glass upgrade (UV-blocking) | $450 – $900 per unit, above the base sealed-unit price |
| Gasket and weatherstripping refresh | $95 – $250 per window |
| Whole-home energy-efficient replacement (15 openings) | $13,000 – $26,000 depending on glass spec and series |
What moves the price: glass spec (solar-control coatings cost more), window size, second-story access, and whether the existing frame is reusable. We don’t use allowances in the quote – the number written is the number invoiced. Call (844) 560-5201 and your estimate is free.
Why Summerlin Homeowners Call Sightline Windows & Doors Summerlin for CWS Work
We work on CWS under the Haven Standard, which governs every one of the 18,000+ openings we’ve installed since 2012. That means a written price before any work starts, a measured survey you keep, a documented photo record on every visit, and the 365-Day Done Right Promise – if it’s not done right, we make it right. Haven Clause 3 (Verified Crews) is why the person at your door is background-checked, uniformed, and listed by license number before arrival. Calls are answered by a live person, not a voicemail queue.
As an independent CWS service provider, we’re not affiliated with or authorized by CWS – which means we specify the right glass for your opening rather than the glass a manufacturer rep is trying to move. We also handle PGT, CGI, ES Windows, and ECO Window Systems, so if a CWS part is discontinued we have a documented alternative instead of a dead end. Our technicians have up to 14 years of experience, and we’ll review any competitor’s written estimate at no charge.
FAQs

Does replacing CWS windows affect the original warranty? Replacing glass or units on your own voided portions of a CWS warranty are narrow, and full-window replacement with properly matched series and licensed installation preserves the rest. We document what we install on every job so the paper trail is intact – and our own 365-Day Done Right Promise covers our work regardless. Call (844) 560-5201 to review what your warranty allows before we quote.
Can you still get parts for older CWS series? In most cases yes, at least for glass and gaskets; where the OEM profile is discontinued we specify a documented quality aftermarket equivalent and note it on the scope. We do not use unmarked gaskets because the long-term energy performance depends on the seal. Call (844) 560-5201 with your CWS series name and we’ll confirm parts availability.
Should I repair the failed unit or replace the window? If the frame and sash are sound and only the sealed unit failed, a sealed-unit replacement is usually the right call and runs $320 – $620 per unit. If the frame is warped, the glazing gasket keeps failing, or the window is more than about 20 years old, full replacement often costs less over a ten-year horizon. We’ll tell you which one is which in writing.
How much does a CWS energy-efficient window replacement cost in Summerlin? Most single-opening replacements land between $850 and $1,700 depending on glass spec, size, and access. Whole-home projects of around 15 openings run $13,000 to $26,000. Call (844) 560-5201 for a free written estimate.
How long does the job take? Single-window sealed-unit replacements are usually done in one visit. Whole-home replacements are scheduled across one to two weeks depending on opening count and whether permits are required. The timeline is written into the scope before work starts.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
