New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Impact Windows & Doors in Summerlin: What to Know First
We install and service Mr-Glass impact windows and doors in Summerlin as an independent Mr-Glass service provider, and most standard residential swaps wrap up in one to three working days once the materials are on site. Impact-rated Mr-Glass orders on custom sizes typically run four to eight weeks from a signed written scope. You will see the price in dollars on paper before anyone lifts a tool – that’s Haven Clause 1, “Have it in writing,” and it applies to Mr-Glass work the same as everything else we install.
This page is for Summerlin homeowners who already own a Mr-Glass opening, or who are weighing Mr-Glass against the other lines we carry – PGT, CGI, CWS, ES Windows – and want the trade reality rather than a brochure. Call (844) 560-5201 and a live person answers, day or night.
Key Takeaways
- Mr-Glass impact products hold up well in Summerlin’s heat and wind-driven dust, but seal failures and roller wear are the two most common service calls we get.
- We write the measured survey and the price as the same document, so the quote you sign is the quote you pay.
- OEM replacement parts keep the Mr-Glass warranty intact; we tell you when an aftermarket part will and won’t do the same.
- Every job ends with a documented photo record and the 365-Day Done Right Promise.
How Mr-Glass Products Fail – and How We Fix Them

Mr-Glass builds a solid impact line, but every manufacturer’s product fails in its own way. These are the patterns we see repeatedly on Summerlin jobs, and what we actually do about each.
- Single hung units with a fogged IGU. Summerlin sits at roughly 2,700 to 3,200 feet with summer highs that push past 105°F and a hard daily swing into the 70s at night. That thermal cycling stresses the perimeter seal on a sealed insulating glass unit, and once the desiccant is spent you get haze between the panes that no amount of cleaning touches. The fix is a full IGU replacement with fresh sealant and a re-checked glazing stop, not a pane polish. We measure the visible glass and unit thickness so the replacement matches the original impact rating.
- Double hung and single hung sash that drag or won’t latch. Dust intrusion is real in Summerlin – the wind off the Spring Mountains and the open desert edges of the valley push fine grit into balance channels. That grit wears the sash balance and the tilt-latch, so the window hangs up halfway or stops latching flush. We pull the sash, clean and re-lubricate the channel, and replace the balance or latch with the OEM part where the unit is still under warranty.
- Horizontal roller and sliding impact doors that jump track. The roller assemblies on a Mr-Glass horizontal roller take the full weight of an impact-rated panel, and on a west-facing patio door the UV load degrades the roller tires faster than on an interior slider. Symptoms are a panel that scrapes at the sill or needs a shoulder to close. We replace the roller set, check the track for flat spots, and adjust the panel height so it rolls on the full width of the wheel rather than an edge.
- Vinyl impact frames that show hairline cracks at the weld. Vinyl is dimensionally stable until it isn’t – a frame that was shimmed too tight at install will show stress cracks at the corner weld after a few summers in Summerlin heat. This is an install-stress failure, not a product defect, and it’s why we re-check shim and anchor spacing on any Mr-Glass vinyl unit we touch. Where the crack is structural we replace the frame; where it’s cosmetic we document it and monitor.
- Water intrusion at the sill on wind-driven rain days. Mr-Glass impact units are rated for impact, but the sill pan and end-dam details are only as good as the install. When we get a call after a monsoon, we check the sill pan, the weep system, and the perimeter sealant joint, and we re-flash to the manufacturer’s detail rather than just caulking over the symptom.
Before
AfterOur Mr-Glass Impact Windows & Doors Process
Every Mr-Glass job runs the same sequence, and every step produces a document you keep.
- 1
Measured survey. We measure the opening, the visible glass, the frame depth, and the sightline, and you get that survey in writing. It’s the basis for the quote – the two can’t disagree.
- 2
Diagnosis and parts decision. We identify the Mr-Glass series and the failed component, then tell you plainly whether an OEM part is required to protect the warranty or whether a quality aftermarket part does the same job for less. You decide with the trade-off in front of you.
- 3
Written scope and price. Before any work starts, you have the line-item price in dollars, the part numbers, and the schedule. No change orders unless you ask for a change.
- 4
The install or repair. Background-checked, uniformed technicians, license numbers on the page, working to the manufacturer’s install detail. We pull permits where Summerlin and Clark County require them, and we pass the inspection.
- 5
Test and document. Every unit gets an operation test – open, close, latch, lock, weep check – and we photograph the finished work and the seal details. That photo record goes in your file.
- 6
The guarantee. The 365-Day Done Right Promise is stamped on the job. If it’s not done right, we make it right.
What Mr-Glass Impact Windows & Doors Costs in Summerlin

These are the ranges we see on Summerlin Mr-Glass work. Your actual price depends on size, series, and whether we’re repairing or replacing, and you’ll get it in writing before we start.
- Single hung or double hung impact window replacement (standard size): $850 – $1,600 per opening, installed.
- Horizontal roller or sliding impact door: $2,200 – $5,500 per unit, depending on width and panel count.
- Sealed IGU replacement (fogged unit): $275 – $650 per unit, plus glass handling on large panels.
- Roller, balance, or latch repair: $150 – $400 per opening, parts and labor.
- Sill pan and water-intrusion re-flash: $300 – $900, depending on access and extent.
What moves the price: custom sizes and non-standard colors, tempered or laminated upgrades, second-story access, and whether the frame is sound enough to hold a new unit. We give you a free second opinion on any written estimate you already have, and we’ll review it at no charge. Call (844) 560-5201 to schedule your free estimate.
Why Summerlin Homeowners Call Sightline Windows & Doors Summerlin for Mr-Glass Work
We install and service Mr-Glass because it’s a genuine impact line that performs in Summerlin’s climate – not because it’s the only thing we carry. Our technicians have up to 14 years of experience across impact, energy-efficient, and custom glazing, and they know the Mr-Glass series well enough to tell you when a repair holds and when a replacement is the honest answer.
What sets us apart is the paperwork. The measured survey and the written price are the same document under the Haven Standard. The 365-Day Done Right Promise is stamped on the job, not offered as a courtesy. The photo record is standard, not an upsell. And when a Mr-Glass part is back-ordered, our other lines – PGT, CGI, CWS, ES Windows – sometimes solve the problem faster, and we’ll tell you so.
Calls are answered by a live person, 24/7, not a voicemail queue. Call (844) 560-5201 and we’ll get you a written price before anything starts.
FAQs

Not if the work is done to the manufacturer’s install detail with the right parts. We use OEM components where the warranty requires them and tell you in writing when an aftermarket part would put the warranty at risk. Call (844) 560-5201 and we’ll review your specific Mr-Glass series and coverage before we touch anything.
Yes. Standard Mr-Glass parts – rollers, balances, latches, glazing stops – typically arrive in a few business days, while custom IGUs and full units can run four to eight weeks. We tell you the lead time up front so you can plan. Call (844) 560-5201 for a parts and timing check on your specific opening.
Repair if the frame, glass, and impact rating are intact and only a component failed – a roller, balance, or latch. Replace if the IGU has failed, the frame weld is cracked, or the unit no longer meets the impact rating you need. We give you the honest call in writing after a measured survey. Call (844) 560-5201 to schedule it.
We schedule surveys and repairs as planned work, and we’ll give you a real window when you call – we don’t promise same-day on planned installs because the measurement and the quote take the time they take. For storm or water-intrusion damage, tell us when you call and we’ll prioritize it. Reach us at (844) 560-5201, any hour.
Where Clark County and Summerlin community requirements call for a permit, yes – we pull it and we pass the inspection, and the inspection record is part of your file. Call (844) 560-5201 and we’ll confirm what your specific job needs.
Call (844) 560-5201 to schedule your free estimate on Mr-Glass impact windows and doors in Summerlin. You’ll get a written price before any work starts, a measured survey you keep, and a documented photo record when the job is done – all under the Haven Standard and the 365-Day Done Right Promise.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
