New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Sliding & Patio Doors: The Summerlin Owner’s Guide
We install and replace Mr-Glass sliding and patio doors across Summerlin, and a full door replacement typically runs $1,850 to $4,200 installed depending on panel width, glazing package, and frame color. Most Summerlin owners don’t discover a problem until the door starts dragging on the track, the lock stops lining up, or the glass fogs between the panes. By then the door has usually been telling you something for a year: a roller that’s flat-spotted, a weatherstripping seal that’s baked out, or a dual-pane seal that’s given up in the desert heat. Sightline Windows & Doors Summerlin is an independent installer and is not affiliated with Mr-Glass; we work with their door product alongside PGT, CGI, and CWS.
Key Takeaways
- Mr-Glass sliding and patio doors in Summerlin most often fail at the rollers, the lock, or the dual-pane seal, in that order.
- Replacement cost runs roughly $1,850 to $4,200 installed, written on the page before anyone touches the opening.
- Fogged dual-pane glass cannot be repaired in the field; the sealed unit is replaced.
- We quote from a measured survey you keep, and the invoice can’t drift from that document.
Which Mr-Glass Models This Applies To

Mr-Glass builds sliding and patio doors in a few frame families, and the part that matters changes with each. Vinyl-framed sliders are the most common in Summerlin builds from 2015 on, and their rollers, glazing beads, and lock hardware are the pieces we replace most. Aluminum-framed units run narrower profile tolerances and use different roller housings and a different lock throw, so a vinyl part will not cross over. The sticker on the door jamb or the top rail of the sliding panel usually carries the model and glass spec; if it’s gone, we identify the door from the frame profile, panel width, roller position, and a measurement of the opening itself.
On the OEM-versus-aftermarket question for Mr-Glass specifically, the honest answer is that it depends on the part. A lock or a roller from a quality aftermarket maker that matches the housing and wheel diameter will last as long as the original and cost less. Glazing beads and corner keys are a different story: they’re molded to the specific frame extrusion, and a near-match that seats a millimeter off will leak air or water within a season. We specify by what the opening actually requires, not by what a catalog says is close.
Before
AfterSigns Your Mr-Glass Sliding & Patio Doors Is Failing
- The door drags or needs a shove to close. A flat-spotted or seized roller, made worse by grit that collects in a Summerlin track after a windy spring. The roller is a wear part and wears faster in desert dust.
- The lock won’t line up or feels loose. A worn keeper or a door that’s dropped slightly on its rollers, which throws the lock geometry off. Forcing it grinds the latch and shortens its life.
- The glass looks cloudy or has a milky edge. The sealed unit’s spacer has failed and moisture is inside the panes. No cleaner fixes this, and the unit is replaced, not repaired.
- You feel heat radiating off the glass or a draft at the frame. A degraded low-E coating or a worn weatherstripping seal. In Summerlin summers, failing low-E shows up as a hot interior glass surface you can feel on your arm.
- Water stains on the interior sill after rain. Weep holes clogged or the sill seal gone. Left alone, this is the failure that quietly rots the subfloor at the threshold.
Replacement Cost & What’s Included

In Summerlin, a Mr-Glass sliding door replacement runs about $1,850 for a standard-width vinyl slider with a basic glazing package, up to roughly $4,200 for a wide multi-panel unit or one with an upgraded impact or energy-rated glass package. The range is driven by panel width and count, the glazing spec, frame color, and whether the opening needs any framing correction. Our written quote is a line-item document: parts, labor, disposal, and any trim work, each named with a dollar figure. Nothing on that quote changes after work starts. Every job carries the 365-Day Done Right Promise, and our technicians install under the Haven Standard with a photo record at completion.
DIY or Call Us?
You can safely inspect and clean the track, clear the weep holes, check that the rollers aren’t visibly crushed, and tighten a loose handle screw. That’s the extent of what we’d suggest doing yourself.
Where DIY goes wrong on a patio door is the weight. A full glass slider panel can run well over a hundred pounds, and lifting one out of its track to swap rollers or a sealed unit is how people pull a back muscle or drop a panel that shatters. The sealed unit itself has to be ordered to the exact channel dimension, and a unit seated slightly crooked will leak again. We’d rather you call and let a trained technician do the lift and the measurement. Call (844) 560-5201 for a free estimate, and we’ll quote the parts and labor in writing before anything moves.
FAQs

Rollers and weatherstripping typically last six to ten years in Summerlin’s heat and dust, while the sealed glass unit often lasts eight to twelve before fogging. Frame and structure can last decades. The heat accelerates the wear parts, so track maintenance stretches that first number.
Yes, in most cases. A failed sealed unit is replaced, not repaired, but the frame and panel stay. A worn lock, keeper, or roller is also swapped without replacing the door. Full replacement is only needed when the frame itself is bent or rotted.
A roller or lock swap is usually a couple of hours. A sealed-unit replacement takes a few hours once the correct unit is in hand. A full door replacement is typically a full day. We’ll tell you the schedule in the written quote.
We identify the frame family from the jamb sticker or by measuring the profile, roller housing, and panel width, then source the part to that spec. No guessing on glazing beads or lock throws; those are molded to the frame and have to match. The measured survey we hand you at the start documents exactly what we found.
Yes. Every installed job is covered by the 365-Day Done Right Promise, and you get a written warranty plus a photo record of the completed work. If something isn’t right, we come back and make it right.
If your Mr-Glass patio door is dragging, fogging, or leaking, the next step is a written price, not a phone quote. Call (844) 560-5201 to schedule your free estimate with Sightline Windows & Doors Summerlin. We’ll bring the measured survey, name every part and labor line in dollars, and leave the opening working the way it should. We install and replace sliding and patio doors across Summerlin and the surrounding valley, and we’re happy to look at any Mr-Glass door you have along with doors from PGT, CGI, and CWS.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
