New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Window Installation: The Summerlin Owner’s Guide
Mr-Glass window installation in Summerlin typically runs $520 to $1,450 per opening installed, depending on size, glazing package, and whether the existing frame is sound enough to reuse. We handle Mr-Glass units and the rest of our eight manufacturer lines with a written price before any work starts. Most Summerlin owners discover they need this page the same way: a sash that won’t seat, fog between the panes, or a draft they can feel at the frame on a July afternoon when the outside air hits 108°F and the glass is working harder than it should.
That’s usually not one failure. It’s a seal, a balance, or a latch that gave out first and took the rest with it.
Key takeaways
- Installed Mr-Glass window pricing in Summerlin: $520 to $1,450 per opening.
- Mr-Glass units are spec’d to specific rough-opening dimensions; the label inside the jamb is the document that matters.
- Fogged glass and failed balances are the two failures we see most in Summerlin’s desert swing between hot days and cold nights.
- Every job gets our written price before work starts and a documented photo record when it’s done.
Sightline Windows & Doors Summerlin is an independent installer. We’re not affiliated with Mr-Glass, and we say so plainly – we install and replace their units the same way we install PGT, CGI, and CWS, specified by what the opening requires.
Which Mr-Glass Models This Applies To

Mr-Glass builds to a range of series and configurations, and the part that fits one won’t fit another. The first thing to find is the manufacturer label, usually a silver or white sticker on the inside of the jamb, sometimes tucked behind the sash on the head. That label carries the series designation and the original unit dimensions. Photograph it before you do anything else, because it’s the single document that keeps you from ordering the wrong size.
The compatibility gotcha most Summerlin owners hit: rough-opening dimensions and unit dimensions are not the same number. A window that measures 36 inches across the frame can sit in a rough opening closer to 37 or 37.5 inches, and Mr-Glass units from different production runs can vary by fractions that matter at install. We measure the opening, not the old unit, and we confirm the glass package – tempered, laminated, Low-E, impact-rated – against what Summerlin’s climate and any HOA rules require.
On the OEM-versus-aftermarket question for Mr-Glass specifically: OEM parts guarantee a fit to the original series, but quality aftermarket equivalents exist for common hardware like balances, latches, and weatherstrip, and they often cost less and arrive faster. Where the glazing unit itself has failed, we specify a matched replacement rather than a generic one – a mismatched U-factor or SHGC defeats the point of the upgrade. Our technicians have up to 14 years of experience reading these labels and matching them correctly.
Before
AfterSigns Your Mr-Glass Window Installation Is Failing
Summerlin’s climate is hard on windows in a specific way. Days push past 105°F, nights drop 30 degrees or more, and that daily expansion and contraction works on seals, gaskets, and balances year after year. Here’s what failure looks like before it becomes a bigger repair:
- Fog or condensation between the panes. The insulated glass seal has broken and moisture is inside the unit. It won’t clear on its own, and the glass has to be replaced, not wiped.
- A sash that won’t stay up or drifts down. The balance is worn or the wrong tension for the sash weight. Common in windows facing west, where heat load is highest.
- Drafts at the frame or along the sill. Weatherstrip has compressed or the frame has shifted. Feel for it on a cool morning, not a hot afternoon.
- Water staining or soft wood at the sill. Water is getting past the exterior seal. Left alone, it reaches the framing, and the repair grows.
- A latch that won’t catch or a sash that binds. Hardware wear or a frame out of square. Both are fixable, but only after we confirm which one it is.
Replacement Cost & What’s Included

Installed Mr-Glass window pricing in Summerlin falls into these ranges. These are installed prices in dollars, before anyone picks up a tool.
| Scope | Installed range |
|---|---|
| Single fixed or small awning unit, standard glazing | $520 – $760 |
| Single-hung or slider, standard glazing | $680 – $980 |
| Large picture or multi-panel unit | $950 – $1,450 |
| Impact-rated or upgraded Low-E glass package | Add $180 – $420 per opening |
What drives the range: opening size, glass package, frame condition, and whether we’re reusing the existing frame or replacing the full unit. Every quote is line-itemed – parts and labor separated, no change orders. The measured survey you get is the document your written price is built from, and the two cannot differ. Every job carries our 365-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Some checks are safe to do yourself. Photograph the label. Measure the visible glass. Note which way the window faces and whether the draft shows up on cool mornings. Those details speed up a quote and cost nothing. What we’d steer you away from: prying a sash out to reach the glass, re-sealing a failed insulated unit yourself, or forcing a balance that’s seized. Window glass is heavy, and a unit that comes out wrong can drop, crack, or let water into the wall behind it – a repair that runs well past the cost of an install.
Most Summerlin window failures are a one-visit job once we have the right unit in hand. Call (844) 560-5201 for a free estimate, and bring us any written quote you already have – we’ll review it at no charge under our free second-opinion offer.
FAQs

How long should a Mr-Glass window last in Summerlin? Fifteen to twenty-five years is a realistic range for the frame and glass, shorter for the seals and balances in our heat. The insulated glass seal is usually what fails first here, because Summerlin’s day-to-night temperature swing is harder on it than a mild climate would be. Call (844) 560-5201 if yours is fogging – estimates are free.
Can a failed window be repaired instead of replaced? Often yes. A fogged unit can get new glass without a new frame, and worn balances or latches are replaceable on their own. Full replacement makes sense when the frame is soft or out of square. We’ll tell you which you’re looking at, in writing, before any work starts.
How long does a Mr-Glass window swap take? A single opening is typically a few hours; a whole-home run is usually one to two days. We confirm the schedule when we book, and we arrive on it – Haven Clause 2, not a courtesy.
How do you source the right Mr-Glass part? From the label on your unit and our own measurement of the opening, matched to the correct series and glass package. We don’t carry parts on a truck or stock them locally – we specify and order what your opening actually needs. Every completed job leaves a documented photo record, so the part and the install are on file. Call (844) 560-5201 and we’ll start with your label.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
