New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Therma-Tru Door Installation: The Summerlin Owner’s Guide
Therma-Tru entry and patio door installation in Summerlin typically runs $3,800 to $7,200 per opening installed, depending on door series, sizing, and whether frame work is included, and we schedule most installations within two to three weeks of a measured survey. Owners usually find us after a specific failure: the door stops latching cleanly, daylight shows at a corner, or the latch hardware has worn to the point where the handle turns without engaging. In Summerlin’s dry heat, these symptoms often trace back to a component that has cooked through more UV cycles than the door itself was rated for.
Key takeaways:
- Therma-Tru doors in Summerlin face 300-plus days of sun and single-digit humidity; that combination ages seals and hardware faster than the national average.
- Match the part to the series before ordering. Fiber-Classic and Smooth-Star use different hardware platforms.
- We are an independent installer and are not affiliated with Therma-Tru.
- Every Sightline job leaves a written price before work starts and a photo record when it ends.
Which Therma-Tru Models This Applies To

Therma-Tru builds several distinct product families, and the part that fits one will not fit another. Fiber-Classic and Smooth-Star lines use a common slam-latch platform that is broadly interchangeable. The American Style and Classic-Craft lines are deeper and use different hinge spacing. Before you order anything, look for the label inside the hinge jamb: it carries the model number and the rough opening dimensions. If the label has peeled in Summerlin’s heat, measure the slab width and thickness yourself. A standard Therma-Tru slab is 1.75 inches thick, but the Rough Opening can vary by more than an inch across series, and a door that’s off by half an inch will not seal.
On the OEM question: Therma-Tru replacement parts are the safest fit because the batch tolerances match the door they came from. Quality aftermarket equivalents exist for common hardware, but they’re worth considering only when you can verify the specs directly against the label. On parts like hinge and latch, aftermarket is reasonable. On anything touching the weather seal or frame, OEM is the right call.
We also install PGT, CGI, and CWS door and window lines when the opening calls for a different performance tier.
Before
AfterSigns Your Therma-Tru Door Installation Is Failing
- Door will not latch without a push. The strike plate or latch has drifted out of alignment. In Summerlin, this often happens after the frame has expanded through a summer cycle and has not fully contracted in winter.
- Daylight shows at a corner of the slab. The weather seal has compressed or torn. Therma-Tru seals are designed to last 10 to 15 years in ideal conditions; in Summerlin’s climate, seven to nine years is more realistic.
- Handle turns but the door stays closed. The latch mechanism has failed internally, usually a worn spring or a stripped spindle. This is a hardware problem, not a structural one.
- Door drags on the threshold or rubs the jamb. Hinge screws have loosened or the frame has shifted. This is worth catching early; continued drag grinds the slab edge and eventually warps the frame.
- Visible moisture or staining inside the frame. The sill pan or door pan has failed, which allows water intrusion behind the frame. In Summerlin’s rare but heavy monsoon storms, this is the failure that causes the most hidden damage.
Replacement Cost & What’s Included

Therma-Tru door installation in Summerlin runs $3,800 to $7,200 per door installed. That range reflects door series, slab size, hardware option, and any frame or sill work. A standard Fiber-Classic entry door with mid-grade hardware sits at the lower end. A Classic-Craft door with custom sizing, upgraded finish, and sill pan replacement sits at the upper end. The written price includes removal of the old door, disposal, hardware installation, seal and trim, and a post-install photo record. The measured survey and the final invoice are the same document. No change orders unless you request them.
DIY or Call Us?
You can safely verify the door label, measure the rough opening, and photograph the hardware before calling. You should not attempt to remove a door in an exterior wall yourself if the frame has any soft spots or the sill pan is suspect; opening the frame reveals what’s behind it, and water damage behind a failed pan can compromise the wall structure. Our technicians have up to 14 years of experience and are background-checked and identified by license number before arrival. If you have a written estimate from another installer, we’ll review it at no charge as a second opinion. Call (844) 560-5201 to schedule a free estimate.
FAQs

How long does a Therma-Tru door last in Summerlin? Twelve to eighteen years for the door frame and slab; seven to nine years for weather seals and hardware. Summerlin’s heat and low humidity accelerate seal aging, so seal replacement is the first service most owners need.
Can a Therma-Tru door be repaired instead of replaced? Often yes. Latch and hinge failures, seal replacement, and strike plate alignment are all repairable. Frame rot, sill pan failure, or a warped slab usually mean replacement is the better investment. We’ll tell you honestly which one applies after the survey.
How long does a Therma-Tru door installation take? A standard single door is a one-day install. A double door or a door requiring sill pan replacement runs two days. We confirm the schedule in the written scope.
How do you source the replacement part? We identify the model from the hinge jamb label, measure the rough opening, and order from the Therma-Tru parts catalog, not from stock. That way the batch tolerance matches your door. If the label is missing, we measure the hardware and cross-reference the series.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
