New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Therma-Tru Sliding & Patio Doors: The Summerlin Owner’s Guide
We install Therma-Tru-compatible and Therma-Tru-line sliding and patio doors throughout Summerlin, with typical full replacement running $3,400 to $7,800 installed depending on width, glazing, and frame condition. Sourcing and swapping a single failed component – a roller set, a lock, a weather seal – usually lands between $185 and $540 installed, and most single-part jobs are scheduled within a few business days of your measured survey. You’ll know a part has gone when the panel starts dragging on the sill, the latch needs a shoulder to engage, or you can hear the wash of the golf course through a closed door at Red Rock.
Which Therma-Tru Models This Applies To

Therma-Tru’s sliding and patio door lines aren’t one product. The Fiber-Classic and Smooth-Star door slabs are common on hinged patio applications, while the sliding and multi-panel units most Summerlin homeowners are actually calling about come through Therma-Tru’s patio door range – typically fiberglass or steel skins over a wood or composite stile, with a vinyl or wood sliding panel. Before we quote a part, we read what’s on the unit itself: the certification label on the top or hinge-side jamb, the glass spacer identification, and the brand on the lock body. On Therma-Tru sliding doors the roller assembly and the mortise lock are the two components most often misordered, because the roller is matched to the track depth and the lock is matched to the stile width – not to the door color or model name.
The OEM-versus-aftermarket decision is genuinely yours to make, and we’ll lay it out in writing. Therma-Tru-branded replacement rollers and lock cartridges are the safe exact-match route; a quality aftermarket equivalent is available for several common roller sizes and will function identically, usually at 30 to 50 percent less. On critical hardware – the multi-point lock, the handle set – we lean OEM, because the geometry is unforgiving. On consumables like weather stripping and roller wheels, aftermarket is fine and we say so.
We also service and source parts-compatible hardware for PGT, CGI, and CWS doors, so if your Summerlin home has a mix of openings we can look at the whole elevation in one visit.
Before
AfterSigns Your Therma-Tru Sliding & Patio Doors Is Failing
Therma-Tru sliding doors fail in a predictable order here. The desert climate in Summerlin – 40-plus-degree daily swings, low humidity, months of UV – punishes seals and hardware faster than the coastal markets these doors were often engineered around. Here’s what owners report, and what’s usually causing it:
- The panel drags or takes two hands to slide. That’s roller wear or a flattened track, not a door that needs replacing. Rollers are the first component to go, typically within 8 to 12 years of daily use.
- You can hear wind or feel a draft at the meeting stile. The interlock weather seal has compressed and lost its recovery. On a Summerlin west-facing door, UV exposure can halve the expected life of that seal.
- The lock won’t latch without slamming. The mortise lock or the keeper has shifted, or the panel has dropped on a worn roller. It’s usually a hardware-and-alignment fix.
- Water pools at the threshold after a monsoon. The sill sweep or weep system has failed. Left alone, this is the symptom that eventually rots the subfloor, so it’s worth fixing early.
- Fogging between the glass panes. That’s a failed insulated glass unit (IGU) seal – a glass issue, not a hardware one, and it’s replaced as a unit rather than repaired.
Replacement Cost & What’s Included

Here’s what Summerlin homeowners typically pay for Therma-Tru sliding and patio door work, itemized so you can see exactly where the money goes:
- Roller set, both panels, installed: $185 to $320. Includes track cleaning, panel alignment, and a documented photo record of the before and after.
- Mortise lock or handle set, installed: $240 to $420, depending on OEM versus aftermarket and finish.
- Weather seal and interlock replacement: $200 to $360.
- Insulated glass unit replacement: $480 to $1,100 for a standard patio door lite, depending on glazing – low-E, tempered, or impact-rated.
- Full sliding patio door replacement: $3,400 to $7,800 installed. Width, glazing choice, frame condition, and whether we’re pulling a permit drive the number.
What drives the range: door width, the glazing spec (a standard clear unit versus a low-E or impact-rated one is a real jump), and whether the frame or sill needs repair underneath. We don’t separate the quote from the install – the measured survey you keep and the written price are the same document. Every job is stamped with the 365-Day Done Right Promise: if it’s not done right, we make it right. That’s in writing, not a verbal assurance.
DIY or Call Us?
Some things are genuinely safe to check yourself. You can slide the panel and listen for grit or grinding in the track, look for a bent or kinked weather seal, and wipe the track clean to see if the drag improves. What we don’t recommend is removing the panel to swap rollers or pulling the lock body on your own – not because it’s dangerous in the way electrical work is, but because a dropped glass panel is heavy and expensive, and a mis-seated roller or a lock reinstalled with the stile out of square is a problem that costs more to fix than to do once. On sliding doors, the failure mode is almost never where the homeowner first looks. If your Summerlin door is dragging, drafting, or won’t latch, the fastest path to an honest answer is a call to (844) 560-5201. We’ll tell you whether it’s a part or a panel.
FAQs

Rollers typically give 8 to 12 years of daily use, weather seals 5 to 9 years, and the insulated glass seal 10 to 15 years – shorter on west- and south-facing openings where Summerlin’s UV and temperature swings are harshest. If your door is past those windows and the symptoms have started, that’s expected wear, not a defect.
Usually yes. In our experience the majority of Therma-Tru sliding door callbacks are a hardware or seal issue, not a structural one, and a roller swap or interlock replacement restores the door for a fraction of replacement cost. Replacement only becomes the right answer when the frame or sill has failed or the glass is failing across multiple units.
A roller, lock, or seal replacement is typically a half-day appointment. An insulated glass unit swap is usually the same visit once the unit is on site. A full door replacement is scheduled as a separate install day after the measured survey and written quote are in your hands.
We identify the exact component from the door’s certification label, roller track depth, and lock stile width, then quote you both the OEM and a quality aftermarket option in writing – you choose. We don’t carry parts on a truck or stock them locally; the part is matched to your specific door before it’s ordered, which is why we don’t confuse one Therma-Tru line’s hardware with another’s.
Sightline Windows & Doors Summerlin is an independently owned and operated installer under the Haven Standard, not affiliated with Therma-Tru. Every engagement starts with a measured survey you keep, every crew member is background-checked and identified by license number before arrival, and every finished job leaves a documented photo record. Calls are answered by a live person around the clock, and we’ll review any written estimate you bring us at no charge. Call (844) 560-5201 to schedule your free estimate for your Summerlin sliding and patio door.
Written by the team at Sightline Windows & Doors Summerlin, serving Summerlin and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
