New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Why Summerlin Homeowners Choose CGI Windows & Doors
Quick answer: Sightline Windows & Doors Summerlin is an independent service provider that repairs and replaces CGI windows and doors across Summerlin, NV – from Series 5000 single-hungs to 3-Lite sliding glass doors. We’re not affiliated with or authorized by CGI, and we say so plainly. What we bring is weekly, hands-on work on CGI’s vinyl lines in this market: the pivot shoes, crank operators, insulated glass units, and roller assemblies that fail under Summerlin’s sun. That series-level familiarity is what separates us from a generic install and repair outfit. Call (844) 560-5201 and we’ll give you a written price before anyone touches a frame.
Summerlin homeowners tend to research before they call. They read the three-star reviews, they want dollars on the page, and they’d rather text than talk. This page is written for that reader: the owner who already has a CGI product and wants a straight, documented answer about fixing it.
Why Trust Sightline Windows & Doors Summerlin for Your CGI Windows & Doors?

Our technicians have up to 14 years of experience, and a good share of those years have been spent on CGI’s Series 5000, Series 7000, horizontal roller, and 3-Lite door lines specifically. That matters because CGI builds to a family of hardware designs that a general handyman often guesses at. We don’t guess. We identify the series first, then match hardware to it.
When OEM CGI hardware is available – operators, rollers, pivot shoes, weatherstrip – we source it for an exact fit. When it isn’t, we use quality aftermarket equivalents matched to the series rather than a part that “sort of” works. Every step is warranty-safe: we read the frame, the glazing, and the seal before recommending anything, so a repair doesn’t quietly void coverage the manufacturer would otherwise honor.
Three things hold across every CGI job. You get a written price before work starts. You get a documented photo record when it’s done. And every job is covered by the 365-Day Done Right Promise – if it’s not done right, we make it right. That’s the Haven Standard, and it’s written, not spoken.
Before
AfterCommon CGI Windows & Doors Problems We Fix in Summerlin
Summerlin’s inland desert climate is hard on vinyl and glass. Triple-digit summer highs, intense UV, dust-laden spring winds, and 40°F winter day-night swings all work on the same assemblies. Here’s what actually fails on CGI products here, and why.
- CGI Series 5000 single-hung sashes that stick or bind. The vinyl frame expands in Summerlin’s heat, and the pivot shoes wear against a track that’s no longer running true. Sashes grab, and the balance spring stretches from years of thermal cycling. A sash that won’t close flush is usually pivot shoes and balance, not the whole window.
- CGI Series 7000 casement and awning crank failures. The operator strips or seizes when UV-degraded lubricant combines with desert dust intrusion. Grinding or a free-spinning handle is the warning sign, not a broken window.
- Fogged dual-pane insulated glass units. Seal breaches are common on south- and west-facing openings hit by 150-degree sun. Once the seal fails, you get fogging between the panes or desiccation that dulls the glass – a glass replacement, not a frame replacement.
- CGI horizontal roller and 3-Lite sliding door drag. Roller assemblies flat-spot, and the aluminum track wears oval. Hard sliding and water intrusion at the sill follow. On Summerlin’s stucco homes, a hairline stucco crack at the jamb can also point to a wood buck pulling away behind the wall.
- Weatherstrip and glazing-seal degradation. The fine desert particulate sandblasts gaskets and low-E coatings over time, and elastomeric seals crack. It shows up as drafts, dust at the sill, or a sharp jump in summer cooling cost.
CGI Parts & Our Repair-vs-Replace Approach

Most CGI window issues we see in Summerlin are repairable with hardware and glass swaps. Worn pivot shoes, a stripped operator, flat-spotted rollers, or a failed insulated glass unit are all fixable without tearing out a frame – which keeps your stucco intact and your village design intact.
But some cases justify full-frame replacement. Severely degraded vinyl, a frame that’s out of plumb, or repeated seal failures on the same opening mean a glass-and-hardware fix is money spent on a short runway. We’ll tell you which one you’re looking at, in writing, with the reason.
We don’t claim to carry CGI parts in stock. Every part is sourced to the job – OEM when we can get it, a matched aftermarket equivalent when we can’t – and it’s specified in your written quote so there’s no surprise when the truck shows up. Call (844) 560-5201 for a free estimate on your CGI repair or replacement.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We identify the CGI series first – Series 5000, Series 7000, horizontal roller, or 3-Lite door – then test the actual failure: pivot shoes, balance, operator, rollers, or IGU seal. A fogged unit gets a moisture check at the perimeter seal, not a guess.
- 2
Written scope. You get a measured survey you keep and a written price that matches it. Parts are listed by what they are, OEM or matched aftermarket, with the repair-vs-replace recommendation and the reason behind it.
- 3
Repair or install. Hardware swaps, glass replacement, or full-frame replacement, sequenced so stucco and finish stay intact. If a village design submittal is triggered, we flag it before any unit is ordered.
- 4
Test. Every sash, crank, roller, and sill is operated and checked – flush close, smooth slide, drain clearance – before we call it done.
- 5
Warranty and record. You get the documented photo record and the 365-Day Done Right Promise in writing. Anything that fails within that window, we make right.
CGI Products We Service & Install in Summerlin

We work across CGI’s vinyl window and door families, with the most volume on these four in Summerlin:
- CGI Series 5000 single-hung windows – pivot shoe, balance, and frame-truing work.
- CGI Series 7000 casement and awning windows – crank operators, hinges, and seal work.
- CGI horizontal roller windows – roller and track service.
- CGI 3-Lite sliding glass doors – roller assemblies, track wear, and sill water intrusion.
For a typical case: a homeowner notices a CGI single-hung in a west-facing wall won’t close flush and the sash feels loose. The usual cause is worn pivot shoes and a stretched balance from years of thermal cycling. A qualified local pro typically replaces the pivot shoes and balance, lubricates the track, and checks the frame for plumb before reinstalling the sash. For a fogged dual-pane, the fix is a new IGU matched to the existing CGI frame.
We Also Service These Brands
CGI is one of eight manufacturer lines we work on. We also service PGT, CWS, ES Windows, and ECO Window Systems windows and doors across the Summerlin area. If your home has a mix of brands – common in remodels and additions – one call covers all of them, specified by what each opening actually requires rather than what’s convenient.
FAQs – CGI Windows & Doors Service in Summerlin

No. We’re an independent CGI service provider – not affiliated with or authorized by CGI. Our expertise comes from hands-on repair and replacement across the Summerlin market, not from a manufacturer badge. Call (844) 560-5201 to schedule a free estimate.
Yes, whenever they’re available for the series – operators, rollers, pivot shoes, and weatherstrip. When OEM parts aren’t available, we use quality aftermarket equivalents matched to the specific CGI series, listed on your written quote. Call (844) 560-5201 for a free estimate.
Hardware repairs like pivot shoes, a crank operator, or rollers are often a single visit. A fogged IGU replacement depends on lead time for the glass matched to your frame, so it’s a two-visit job. Your written quote states the timeline before work starts. Call (844) 560-5201 to schedule.
We cover the CGI Series 5000 single-hung, Series 7000 casement and awning, horizontal roller, and 3-Lite sliding glass door – the lines most common in Summerlin homes. Call (844) 560-5201 if you’re unsure which series you have; we’ll identify it during the survey.
Not when it’s done correctly. We read the frame, glazing, and seal before recommending anything and use parts matched to the series, which keeps the repair warranty-safe rather than voiding coverage. Call (844) 560-5201 for a free estimate and a written scope.
Hardware repairs typically run in the low-to-mid hundreds in dollars per opening, while a replacement insulated glass unit or full-frame replacement runs higher depending on size and series. Every job gets a written price before work starts. Call (844) 560-5201 for an exact quote – estimates are free.
Book Your CGI Service in Summerlin, NV
If you have a CGI window or door that’s sticking, fogged, or dragging, the next step is a written price. Call (844) 560-5201 and we’ll set up a free estimate – diagnosis, series identification, and a documented scope you keep. Live coverage, 24/7. Bring a competitor’s quote and we’ll review it at no charge.
Written by the team at Sightline Windows & Doors.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
What Neighbors Say About Sightline Windows & Doors Summerlin
