Last updated November 17, 2026
New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Summerlin pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
How Long Does Window Replacement Take? Timelines and What to Expect
A single window replacement takes 45 to 90 minutes of installation labor. The process around it is what takes weeks. The measured survey, the factory order, the inspection when the units arrive, and the scheduling of the crew all add 4 to 10 weeks depending on your glass specification and whether the unit is stock or built to order. Most contractors quote the whole thing as one number, then surprise you when “two weeks” becomes eight. This guide breaks the timeline into three phases for Summerlin homes, so you can read any contractor’s schedule as a checklist instead of a promise.
Quick Answer

Window replacement typically takes 4 to 10 weeks from signed contract to finished install. A stock-size insert window can be ordered and installed in about 3 to 5 weeks. A full-frame replacement or a custom-sized unit for a home built before 2000 runs 6 to 10 weeks. The installation itself is fast: a single window is 45 to 90 minutes, a full room is one day, and a whole house is usually 2 to 4 days. The weeks live in the survey and the factory lead time, not in the labor.
Before
AfterTable of Contents
- The Three Phases Most Contractors Quote as One Number
- Phase Timeline by Window Type
- What Drives Lead Time: Glass, Frame Color, and Backlog
- Installation Day by Window Count
- The Delivery Inspection Step (and Why Skipping It Delays Your Install)
- How to Write Timeline Milestones Into the Contract
- Summerlin-Specific Timing Notes
The Three Phases Most Contractors Quote as One Number

When a contractor says “about four weeks,” they are usually collapsing three separate phases into a single vague figure. Split them apart and you can see where the real time goes.
Phase 1: The measured survey. Someone comes out, measures every opening to the sixteenth of an inch, notes the frame condition, checks the sightlines, and records the glazing type. This is a 60 to 90 minute visit. The written quote should come from this survey, and under Haven Clause 1 it should be a document you keep. If the quote is a number a salesperson gave you at the kitchen table without measuring, the timeline behind it is a guess.
Phase 2: Factory lead time. This is the long phase. The window is built to your specifications. Standard sizes with standard glass can ship in 2 to 3 weeks. Custom sizes, specialty frame colors, or impact-rated glazing can run 4 to 8 weeks. This is the phase most contractors are vague about, and it’s the phase you should ask about directly.
Phase 3: Installation day. The actual labor. A single insert window is 45 to 90 minutes. A full-frame window, where the old frame comes out and the new one goes into the rough opening, is 2 to 4 hours because there’s flashing, sealing, and trim to deal with. A whole house is 2 to 4 days depending on window count and access.
Add the three together, factor in the inspection step and crew scheduling, and you get your real number. For a Summerlin home that needs full-frame replacements with custom trim, that’s closer to 8 to 10 weeks. For a stock insert on a newer build, it can be 3 to 5 weeks.
Phase Timeline by Window Type
Here’s the breakdown by category. These are typical ranges, not guarantees, because manufacturer backlogs move with the season. But they give you a baseline to hold a quote against.
- Stock insert window: Survey 1-2 weeks, lead time 2-3 weeks, install 45-90 minutes. Total: 3-5 weeks.
- Custom insert window: Survey 1-2 weeks, lead time 4-6 weeks, install 1-2 hours. Total: 6-8 weeks.
- Full-frame single window: Survey 1-2 weeks, lead time 4-6 weeks, install 2-4 hours. Total: 6-9 weeks.
- Full-home replacement: Survey 1-2 weeks, lead time 5-8 weeks, install 2-4 days. Total: 8-12 weeks.
An insert window sets into the existing frame. A full-frame window replaces the frame too, which is the right call when the frame is rotted, the flashing is failing, or the window is being enlarged. That extra work is why full-frame installations sit at the high end of the range.
For a Summerlin home built in the 1990s with original aluminum frames, we usually recommend full-frame. Those frames have been through 30 summers of 110-degree heat and thermal movement, and an insert into a tired frame is a shortcut that shows up as a draft later. Our Window Replacement in Summerlin page covers the frame-vs-insert decision in more detail.
What Drives Lead Time: Glass, Frame Color, and Backlog

Three variables move your lead time more than anything else. Ask about all three before you sign.
- Insulating glass unit (IGU) type. A standard double-pane IGU is the fastest build. Triple-pane and impact-rated IGUs require a different assembly line and often a different manufacturing plant. In Summerlin, where afternoon summer sun pushes glass temperatures well above ambient air temperature, a low-SHC (solar heat gain coefficient) IGU is worth the extra 1 to 2 weeks. We routinely specify PGT and ViewLux units for south and west exposures where the U-factor and SHGC actually matter.
- Frame color. White and bronze are typically stock. Custom colors, wood grain laminates, or a specific exterior finish that matches a stucco color run 2 to 4 weeks longer. If the HOA requires a specific color, order early and get the approval in writing before the order goes in. Summerlin has more HOA color restrictions than most of the valley, and a rejected color is a rescheduled install.
- Manufacturer backlog. Ask the contractor to show you the current lead time from the factory, in writing. A contractor who says “I’ll check” doesn’t have it. A contractor who names the week the unit is expected to leave the factory is giving you a real number. Our crew orders across eight manufacturer lines, so when one factory is backed up, there’s usually a comparable unit available one tier across without a redesign.
Ask this question directly: “What’s the factory lead time on the exact unit on this quote, and what week will it ship?” The answer should be a number, not a feeling.
Installation Day by Window Count
Installation labor is the most predictable part of the whole process. Here’s what to expect on the day the crew arrives.
Single window. 45 to 90 minutes. The crew lays drop cloths, removes the old unit, preps the opening, sets and shims the new unit, foam-insulates the perimeter, and reinstalls trim. Cleanup is part of the visit, not a separate trip.
A room (2 to 4 windows). Half a day to a full day. Interior furniture gets moved or covered. Expect dust control via plastic sheeting on the doorway. This is a good time to ask about the Window Installation in Summerlin process if you’re planning a multi-room job.
Full home (10 to 20 windows). 2 to 4 days. The crew works room by room so your house stays livable. Doors stay accessible. Each day ends with a walk-through and a photo record of what was completed. If you’re also replacing a slider or patio door, a Therma-Tru or Mr-Glass unit in a door opening adds 3 to 5 hours to the job and can be scheduled for the same visit. The Door Installation in Summerlin guide covers door timing separately.
A note on weather: Summerlin installations don’t stop for heat, but crews start early in summer to avoid the worst of the afternoon. In winter, the concern is wind, not rain. An opening left uncovered in a 30 mph gust is a real problem, so the crew sequences the openings one at a time rather than stripping all the windows at once.
The Delivery Inspection Step (and Why Skipping It Delays Your Install)

Here’s the step that causes the most missed install dates, and it happens before the crew ever gets to your house. When the windows arrive from the factory, they need to be inspected on delivery, not on install day.
The inspection covers:
- Glass: chips, scratches, seal failure, or a tint that doesn’t match the order sheet.
- Frame: square, plumb, straight edges, no shipping damage to corners or nailing fins.
- Hardware: locks, hinges, and screens present and functioning.
- Spec: the SHGC and U-factor on the unit label match the quote.
- Count: every opening on the survey has a matching unit, correctly labeled.
If a damaged unit slips through and the crew finds it on install day, the window goes back and the whole install gets rescheduled for the lead time of that single replacement, which is often another 3 to 6 weeks. A contractor who inspects on delivery catches that before the schedule is set. Ask whether the delivery inspection happens on arrival. It’s a one-minute question that prevents a month of waiting.
This is the reason every Sightline job leaves a documented photo record. The photo of the unit on arrival is the evidence that the inspection happened, and the photo at completion is the evidence the install was done right. Both are part of the 365-Day Done Right Promise, not an add-on.
How to Write Timeline Milestones Into the Contract
A verbal estimate of “about six weeks” is not a commitment. A written date in the contract is. The difference matters most when a delay happens, because the written date is what the contractor is accountable to.
Here’s the specific language to look for, or to ask for if it isn’t there:
- Survey date. “Measured survey to be completed by [date].” This anchors the start of the clock.
- Order date and ship date. “Factory order to be placed by [date]; manufacturer ship date confirmed in writing within 5 business days of order.” This is the lead-time commitment.
- Delivery inspection. “All units inspected on delivery; any damaged or incorrect unit reported to the manufacturer within 48 hours and replacement ordered at no cost to homeowner.”
- Installation window. “Installation to begin no later than [date] following delivery inspection.” This is the date a homeowner can hold the contractor to.
- Delay clause. “If manufacturer lead time exceeds the confirmed ship date, contractor will notify homeowner in writing within 3 business days with a revised window.”
- Completion and punch list. “Final walk-through and punch list to be completed on the last installation day; any punch-list item resolved within 10 business days.”
One more term worth asking for: a written statement that the price on the signed quote is the price on the invoice. Under Haven Clause 5 (No surprises), the measured survey and the final invoice are the same document. If a contractor’s contract has an escalation clause for material costs, read it carefully. Our free second-opinion review on any written estimate exists for exactly this reason. Bring us a competitor’s quote and we’ll go through the timeline terms line by line at no charge.
Summerlin-Specific Timing Notes

A few timing pieces are particular to Summerlin, and they’re worth knowing before you order.
HOA approval before order. Summerlin HOAs vary on window color and style. Some approve in a week; some take four. Get the approval letter before the order goes in, or you may order a window the HOA rejects. This is the single most common cause of a delayed Summerlin install, and it’s entirely preventable with one phone call to the management company.
Heat and thermal movement. Summerlin’s 100-plus degree summers are hard on aluminum frames and on the sealant around them. Full-frame replacements done in summer need to be sealed in the morning before the exterior wall heats up, because sealant adhesion drops on a hot surface. That’s a scheduling detail, but it’s one that affects how long each window takes on a summer install.
Stucco and trim matching. Older Summerlin homes often have a specific stucco texture and trim profile that requires a custom match. If your home was built before 2000, plan an extra week for trim fabrication. A custom-trim full-frame job is where the 8 to 10 week range is realistic.
Neighborhood access. In tighter streets in The Ridges or Red Rock Country Club, crew parking and material staging add time to the day. It’s not weeks, but it does push a full-home install toward the 4-day end of the range rather than 2.
If you want a timeline tied to a specific home, the Sightline Windows & Doors Summerlin home page is a good starting point for what a measured survey tells you.
Common Mistakes to Avoid
- Accepting a single number. “Two weeks” tells you nothing. Ask for the survey date, ship date, and install date separately.
- Skipping the HOA approval before order. In Summerlin, ordering before the color approval comes back is how a 6-week job becomes 10. Get the letter first.
- Letting the delivery inspection slide. A damaged unit discovered on install day adds the factory lead time for one window, not one day.
- Choosing insert when the frame is tired. An insert into a 30-year-old Summerlin frame can hold up for a few years and then fail at the frame, not the glass. Pay for full-frame once if the frame is the problem.
- Not asking for the ship date in writing. A lead time that isn’t written into the contract is a lead time that can slip without consequence.
- Scheduling a full-home install without sequencing. A crew that strips all the windows at once leaves openings exposed to summer heat and dust. Sequence room by room.
- Overlooking the second-opinion review. A free review of a competitor’s quote often surfaces a missing lead-time pledge or a vague delay clause. It costs nothing and can save weeks.
When to Call a Professional

If your windows are fogging between the panes, the frames are showing rot or soft spots near the sill, or you can feel hot air at the perimeter on a Summerlin afternoon, it’s time to get a measured survey. If you’ve already gotten a quote you don’t fully understand, that’s also the time to call. A survey and a written price cost nothing. A window ordered into a failing frame, or an install scheduled without an inspection step, costs weeks and a second job.
Sightline Windows & Doors Summerlin offers free estimates in Summerlin, with a measured survey you keep, a written price before any work starts, and a background-checked crew whose license numbers are on the record before they arrive. Call (844) 560-5201 to schedule your free estimate.
Frequently Asked Questions
A single insert window takes 45 to 90 minutes of installation labor. A full-frame single window takes 2 to 4 hours because the old frame comes out and the new one is flashed and sealed into the rough opening. Add 3 to 6 weeks of lead time before install day. Call (844) 560-5201 for an exact timeline on your specific window, estimates are free.
A full-home replacement in Summerlin typically takes 8 to 12 weeks from signed contract to finished install, with 2 to 4 days of on-site labor. The range depends on whether the units are stock or custom, whether full-frame is required, and how quickly the HOA approves the color. Call (844) 560-5201 for a written schedule broken into the three phases.
Yes. Summer installation is standard in Summerlin, and the crew starts early to avoid the hottest part of the afternoon. Sealant application on full-frame jobs is scheduled for the morning while the exterior wall is still cool, because adhesion drops on a hot surface. Nothing about the process stops for heat. Call (844) 560-5201 to schedule a survey.
It shouldn’t. A written quote under Haven Clause 1 is the price on the invoice, and the timeline commitments should be in writing alongside it. If a contractor’s quote has an escalation clause for material costs, read it before signing. Bring us a competitor’s quote and we’ll review the timeline and price terms free of charge. Call (844) 560-5201.
The delivery inspection is the check of every window when it arrives from the factory, before install day. It covers glass condition, frame squareness, hardware, and whether the spec matches the quote. Skipping it is the most common cause of a missed install date, because a damaged unit found on install day means a reschedule for the factory lead time of that single window. Call (844) 560-5201 to ask how we document inspection.
Most Summerlin homes built after 2000 can use stock sizes if the rough opening is square. Homes built before 2000 more often need a custom or full-frame unit because the opening dimensions and trim profiles don’t match current stock. Custom adds 2 to 4 weeks to lead time. A measured survey settles it in one visit. Call (844) 560-5201 for a free estimate.
The Bottom Line

Window replacement takes 4 to 10 weeks end to end, and the number that matters is the one broken into phases: survey date, ship date, install date. Installation labor is fast (45 to 90 minutes for a single window, 2 to 4 days for a full home); the weeks live in the factory order and the inspection step. In Summerlin, HOA color approval and frame condition are the two variables most likely to push a job to the long end of the range. Write the milestones into the contract and you have a schedule you can hold to, not a verbal estimate that drifts.
Call (844) 560-5201 to schedule your free estimate with Sightline Windows & Doors Summerlin. You’ll get a measured survey you keep, a written price before any work starts, a crew whose license numbers are on the record, and a 365-Day Done Right Promise on the finished job.
Written by the team at Sightline Windows & Doors Summerlin.
Six Reasons Homeowners Choose Sightline Windows & Doors Summerlin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Summerlin Services
